Abstract:We demonstrated remarkably enhanced 2.7 mu m emission in glass-ceramic (GC) fibers containing NaYF4: Er3+ nanocrystals with 980 nm excitation for the first time. The melt-in-tube technique is of scientific and technical significance for the fabrication of GC fibers in comparison to the conventional rod-in-tube technique. The obtained precursor fibers, in which the structure can be maintained well, exhibit no obvious element diffusion or crystallization during the fiber-drawing process. After a careful heat treatment, NaYF4 nanocrystals were controllably precipitated in the glass fiber core. Owing to the incorporation of Er3+ ions into the low phonon energy NaYF4 nanocrystals, enhanced 2.7 mu m emission was achieved from the Er3+-doped GC fibers, which was almost undetectable in precursor fibers due to the high phonon energy of the borosilicate glass fiber matrix. Moreover, the 2.7 mm emission lifetime was obtained due to the excellent emission properties of Er3+ in the GC fibers. The transmission loss values of precursor fibers and GC fibers at 1310 nm were measured to be 7.44 dB m(-1) and 11.81 dB m(-1), respectively. In addition, a theoretical simulation based on the rate equations and propagation equations was performed to evaluate the possibility of 2.7 mu m laser output. The excellent optical properties endow the GC fibers with potential applications for mid-infrared fiber lasers.

Yb 3+ heavily doped photonic crystal fiber lasers prepared by the glass phase-separation technology.

66 fs, 3 W all fiber Yb3+-doped mode-locked fiber laser

Growth and Characterization of Yb:Ho:YAG Single Crystal Fiber

Yb-Doped Aluminophosphosilicate Laser Fiber

Spectroscopic and Laser Properties of Al-P Co-Doped Yb Silica Fiber Core-Glass Rod and Large Mode Area Fiber Prepared by Sol-Gel Method

Double-clad large-mode-area polarization-maintaining ytterbium doped photonic crystal fiber

Heavily Yb-doped phosphate large-mode area all-solid photonic crystal fiber operating at 990?nm

Yb-doped large-mode-area laser fiber fabricated by halide-gas-phase-doping technique

Microstructure and Luminescence of Yb3+-doped Fluorosilicate Glass Ceramics

Yb 3+ -Doped 200 Μm Diameter Core, Gain Guided Index-Antiguided Fiber

Yb/Er co-doped phosphate all-solid single-mode photonic crystal fiber

Tm/Al Co-Doped Silica Glass Prepared by Laser Additive Manufacturing Technology for 2-Μm Photonic Crystal Fiber Laser

High ytterbium concentration Yb/Al/P/Ce co-doped silica fiber for 1-μm ultra-short cavity fiber laser application

Precisely controllable fabrication of Er3+-doped glass ceramic fibers: novel mid-infrared fiber laser materials

A novel route to fabricate Yb:YAG ceramic fiber and its optical performance

Preparation of Er:YAG Crystal-Derived All-Glass Silica Fibers For a 1550-nm Single-Frequency Laser

Efficient and Broadband Emission in Dy3+-Doped Glass-Ceramic Fibers for Tunable Yellow Fiber Laser

Yb3+-doped oxyfluoroborosilicate glasses and glass ceramics containing CaF2 nanocrystals for 981 nm near infrared fiber lasers

Divalent Yb-Doped Silica Glass and Fiber with High Quantum Efficiency for White Light Source

Multi‐component yttrium aluminosilicate ( YAS ) fiber prepared by melt‐in‐tube method for stable single‐frequency laser

The Preparation of Yttrium Aluminosilicate (YAS) Glass Fiber with Heavy Doping of Tm3+ from Polycrystalline YAG Ceramics