Abstract:Thermal conductivity measurements of pure R1243zf and binary mixtures of R32 + R1243zf and R32 + R1234yf were conducted in the homogeneous liquid and vapour phases with a transient hot-wire technique. The mole fractions of R32 are 0.25, 0.50, and 0.75 in both binary systems. The temperature range of the measurements was from (264.1 to 405.6) K with pressures ranging between (0.9 and 6.1) MPa. The transient hot-wire apparatus was validated with measurements of pure CO2 in both the liquid and vapour regions. The relative combined expanded uncertainty (k = 2) in the experimental thermal conductivity was approximately 2.0 %. The relative deviations of the measured thermal conductivities from those calculated using the extended corresponding states (ECS) model as implemented in the software REFPROP 10 were between (−13 and 10) % in the vapour phase, and between (−14 and 1) % in the liquid phase. Additionally, the performance of a new approach to predicting fluid transport properties, the residual entropy scaling model incorporating the cubic-plus-association equation of state (RES-CPA model) was tested for these mixtures by first determining the scaling parameter of pure R1243zf. The RES-CPA model was then able to predict the mixture thermal conductivities generally within 10 %, which is similar to the ECS model; however no additional parameters were introduced to the RES-CPA model to describe binary interactions.

Thermal conductivity measurements of the H<sub>2</sub>/CO<sub>2</sub> mixture using the short-hot-wire method at 323.15-620.05 K and 2.14-9.37 MPa

Experimental measurements on chemical reaction and thermal conductivity of the H<sub>2</sub>/CO<sub>2</sub>/CO/CH<sub>4</sub>/H<sub>2</sub>O system using the short-hot-wire method at 664-915 K and 9.2-22.2 MPa

Prediction of the Thermal Conductivity of H2/CO2/CO/CH4/H2O Mixtures at High Temperatures and High Pressures Based on the Extended Corresponding States Principle

High Temperatures and High Pressures Brillouin Scattering Studies of Liquid H2O+CO2 Mixtures

Viscosity Measurements of the H-2-CO2, H-2-CO2-CH4, and H-2-H2O Mixtures and the H-2-CO2-CH4-CO-H2O System at 280-924 K and 0.7-33.1 MPa with a Capillary Apparatus

Pvt Measurements Of The H-2-Co2-Ch4-Co-H2o System At 740-939 K And 18.1-34.7 Mpa With An Isochoric Apparatus And The Development Of A Virial Equation Of State

Accurate Measurements of Thermal Conductivity and Thermal Diffusivity of Molten Carbonates

Thermal Conductivity Measurements and Correlations of Pure R1243zf and Binary Mixtures of R32 + R1243zf and R32 + R1234yf

Isobaric Heat Capacity and Density of Supercritical H2O/CO2 Mixtures: Measurements in a Multifunction Apparatus

Thermal Conductivity of Liquid 1, 2-Dimethoxyethane from 243K to 353K at Pressures up to 30MPa

Density Measurements of the H-2-CO2-CH4-CO-H2O System by the Isochoric Method at 722-930 K and 15.4-30.3 MPa

Measurement of Thermal Conductivity for Systems of Methyl Ethyl Ketoxime with Methyl Ethyl Ketone and N-Hexane Separately

Short Hot Wire Technique for Measuring Thermal Conductivity and Thermal Diffusivity of Various Materials

Measurement of the Thermal Conductivity of Liquid Dimethoxymethane from 240 to 362 K

Thermal conductivity measurements for n-hexane and n-heptane at elevated temperature and pressure

Viscosity Measurements of the H2–CO2, H2–CO2–CH4, and H2–H2O Mixtures and the H2–CO2–CH4–CO–H2O System at 280–924 K and 0.7–33.1 …

Development of a new PVT Measurement Method for the Hydrogen Mixture at High Temperatures and High Pressures

Simultaneous Measurements of the Thermal Conductivity and Thermal Diffusivity of Molten Salts with a Transient Short-Hot-Wire Method

Thermal conductivity of liquid dimethyl ether from (233 to 373) K at pressures up to 30 MPa

Thermal Conductivity of Liquid Dimethoxymethane and Dimethoxymethane + Diesel Fuel at Pressures to 30 MPa

Density Data of Two (H2 + CO2) Mixtures and a (H2 + CO2 + CH4) Mixture by a Modified Burnett Method at Temperature 673 K and Pressures Up to 25 MPa