Abstract:This research presents a comprehensive study of a Schottky diode fabricated using a gold wafer and a bilayer molybdenum disulfide (MoS2) film. Through detailed simulations, we investigated the electric field distribution, potential profile, carrier concentration, and current–voltage characteristics of the device. Our findings confirm the successful formation of a Schottky barrier at the Au/MoS2 interface, characterized by a distinct nonlinear I–V relationship. Comparative analysis revealed that the Au/MoS2 diode significantly outperforms a traditional W/Si structure in terms of rectification performance. The Au/MoS2 diode exhibited a current density of 1.84 × 10−9 A/cm2, substantially lower than the 3.62 × 10−5 A/cm2 in the W/Si diode. Furthermore, the simulated I–V curves of the Au/MoS2 diode closely resembled the ideal diode curve, with a Pearson correlation coefficient of approximately 0.9991, indicating an ideality factor near 1. A key factor contributing to the superior rectification performance of the Au/MoS2 diode is its higher Schottky barrier height of 0.9 eV compared to the 0.67 eV of W/Si. This increased barrier height is evident in the band diagram analysis, which further elucidates the underlying physics of Schottky barrier formation in the Au/MoS2 junction. This research provides insights into the electronic properties of Schottky contacts based on two-dimensional MoS2, particularly the relationship between electronic barriers, system dimensions, and current flow. The demonstration of high-ideality-factor Au/MoS2 diodes contributes to the design and optimization of future electronic and optoelectronic devices based on 2D materials. These findings have implications for advancements in semiconductor technology, potentially enabling the development of smaller, more efficient, and flexible devices.

Near-ideal Van Der Waals Rectifiers Based on All-Two-dimensional Schottky Junctions

A van der Waals pn heterojunction with organic/inorganic semiconductors

Van der Waals Schottky Junction Photodetector with Ultrahigh Rectifying Ratio and Switchable Photocurrent Generation

Approaching the Schottky–Mott limit in van der Waals metal–semiconductor junctions

Asymmetric Schottky Contacts in van der Waals Metal-Semiconductor-Metal Structures Based on Two-Dimensional Janus Materials

Gate-controlled reversible rectifying behavior investigated in a two-dimensional MoS 2 diode

Near‐Ideal Schottky Junction Photodetectors Based on Semimetal‐Semiconductor Van Der Waals Heterostructures

Multimode Signal Processor Unit Based on the Ambipolar WSe2-Cr Schottky Junction

Van der Waals Multi‐Heterostructures (PN, PIN, and NPN) for Dynamic Rectification in 2D Materials

A back-to-back diode model applied to MoS2 van der Waals Schottky diodes

High Rectification Ratio Metal-Insulator-semiconductor Tunnel Diode Based on Single-Layer MoS2

In-plane Schottky-barrier Field-Effect Transistors Based on 1 T /2 H Heterojunctions of Transition-Metal Dichalcogenides

Van der Waals metal-semiconductor junction: weak Fermi level pinning enables effective tuning of Schottky barrier

Gate-Tunable Semiconductor Heterojunctions from 2D/3D van der Waals Interfaces

Simulation of electrical rectification effect in two-dimensional MoSe2/WSe2 lateral heterostructures

Reconfigurable single-gate PdSe2/WS2 diode with high symmetry rectification

Analysis of the relationship between the contact barrier and rectification ratio in a two-dimensional P–N heterojunction

High-performance, multifunctional devices based on asymmetric van der Waals heterostructures

Electronic Barriers Behavioral Analysis of a Schottky Diode Structure Featuring Two-Dimensional MoS2

Simulation of electrical rectification effect in two-dimensional MoSe2/WSe2lateral heterostructures

Realization of Ultra-Scaled MoS 2 Vertical Diodes via Double-Side Electrodes Lamination