Abstract:Vanadium oxides are a promising class of cathode materials for rechargeable aqueous zinc-ion batteries (ZIBs). However, the intrinsically low electrical conductivity and unstable structure of vanadium materials often lead to fast performance degradation. In this work, we report on potassium-rich preintercalated vanadium oxide (K1.1V3O8) as a high-performance cathode material for ZIBs. The K1.1V3O8 cathode exhibits a high specific capacity of 386 mAh g–1 at 0.1 A g–1 and good long-term cycling stability with a capacity retention of 114.9% (180.7 mAh g–1) after 10 000 cycles at 10 A g–1. The DFT calculations reveal a low Zn diffusion barrier and low Bader charge of K in K1.1V3O8, which are responsible for its good rate capability and high storage performance. The demonstration approach of maximizing ZIB performance proves to be an effective way to design promising cathode materials for ZIBs by regulating the appropriate preintercalation metal ions.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsenergylett.1c00625?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsenergylett.1c00625</a>.Kinetics analysis of the energy storage reaction; DFT computational methods; The electrochemical reactions of KVO cathode; Crystal structures of active materials (Figure S1); The FTIR spectrum of LiVO, NaVO, and KVO (Figure S2); XRD, SEM, HRTEM and STEM of LiVO (Figure S3); XRD, SEM, HRTEM and STEM of NaVO (Figure S4); XPS of LiVO and NaVO (Figure S5); CV curves and GCD of LiVO and NaVO (Figure S6); CV curves and GCD of CNT (Figure S7); The Nyquist plots of LiVO, NaVO and KVO based electrodes before and after cycling in two electrode configuration (Figure S8–S9); The cycling performance of LiVO, NaVO and KVO electrodes (Figure S10); The contribution ratio of capacitive process calculated from CV curves of KVO (Figure S11); The Nyquist plots of LiVO, NaVO and KVO in the three-electrode configuration (Figure S12); The electrochemical performance of KV3O8 electrode (Figure S13); TEM image, HRTEM image with SAED pattern, and STEM elemental mapping of KVO discharged to 0.2 V (Figure S14); The intercalation process of Zn2+ into the V–O interlayer spacing of KVO (Figure S15); The intercalation process of Zn2+ into the V–O interlayer spacing of LiVO and NaVO (Figure S16); The intercalation process of H+ into the V–O interlayer spacing of LiVO, NaVO and KVO (Figure S17) (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.1c00625/suppl_file/nz1c00625_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Superior potassium and zinc storage in K-doped VO<sub>2</sub>(B) spheres

Superior potassium and zinc storage in K-doped VO 2 (B) spheres

Surface Amorphization of Vanadium Dioxide (B) for K‐Ion Battery

Constructing oxygen-deficient V2O3@C nanospheres for high performance potassium ion batteries

Ultrafine ZnS Nanoparticles in the Nitrogen-Doped Carbon Matrix for Long-Life and High-Stable Potassium-Ion Batteries

Hybrid Cathodes Composed of K3V2(PO4)3 and Carbon Materials with Boosted Charge Transfer for K-Ion Batteries

Chemically Binding Vanadium Sulfide in Carbon Carriers to Boost Reaction Kinetics for Potassium Storage

Flower-like K1+δVOPO4F crystallite with a layered framework structure as a robust cathode for potassium-ion batteries

Oxygen Defect Engineering toward Zero-Strain V2O2.8@Porous Reticular Carbon for Ultrastable Potassium Storage

Potassium Vanadates with Stable Structure and Fast Ion Diffusion Channel As Cathode for Rechargeable Aqueous Zinc-Ion Batteries

Intercalation engineering of layered vanadyl phosphates for high performance zinc-ion batteries

Advanced K3V2(PO4)2O2F cathode for rechargeable potassium-ion batteries with high energy density

Tetragonal VO2 hollow nanospheres as robust cathode material for aqueous zinc ion batteries

Extremely Durable K-Ion Batteries Enabled by Heteroatom Co-Doped Highly-Ordered Porous Carbon Spheres with Nearly 100% Capacity Retention up to 11,000 Cycles

Rich Alkali Ions Preintercalated Vanadium Oxides for Durable and Fast Zinc-Ion Storage

Nitrogen/phosphorus co-doped carbon decorated with metallic zinc for high-performance potassium-ion batteries

K0.83V2O5: A New Layered Compound As a Stable Cathode Material for Potassium-Ion Batteries

A vanadium-based oxide-phosphate-pyrophosphate framework as a 4 V electrode material for K-ion batteries

High-performance zinc-ion batteries enabled by electrochemically induced transformation of vanadium oxide cathodes

Sn‐, Sb‐ and Bi‐Based Anodes for Potassium Ion Battery

First-principles study of bismuthene as a high energy density and excellent rate performance anode material for potassium-ion batteries