Abstract:Vanadium oxides are a promising class of cathode materials for rechargeable aqueous zinc-ion batteries (ZIBs). However, the intrinsically low electrical conductivity and unstable structure of vanadium materials often lead to fast performance degradation. In this work, we report on potassium-rich preintercalated vanadium oxide (K1.1V3O8) as a high-performance cathode material for ZIBs. The K1.1V3O8 cathode exhibits a high specific capacity of 386 mAh g–1 at 0.1 A g–1 and good long-term cycling stability with a capacity retention of 114.9% (180.7 mAh g–1) after 10 000 cycles at 10 A g–1. The DFT calculations reveal a low Zn diffusion barrier and low Bader charge of K in K1.1V3O8, which are responsible for its good rate capability and high storage performance. The demonstration approach of maximizing ZIB performance proves to be an effective way to design promising cathode materials for ZIBs by regulating the appropriate preintercalation metal ions.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsenergylett.1c00625?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsenergylett.1c00625</a>.Kinetics analysis of the energy storage reaction; DFT computational methods; The electrochemical reactions of KVO cathode; Crystal structures of active materials (Figure S1); The FTIR spectrum of LiVO, NaVO, and KVO (Figure S2); XRD, SEM, HRTEM and STEM of LiVO (Figure S3); XRD, SEM, HRTEM and STEM of NaVO (Figure S4); XPS of LiVO and NaVO (Figure S5); CV curves and GCD of LiVO and NaVO (Figure S6); CV curves and GCD of CNT (Figure S7); The Nyquist plots of LiVO, NaVO and KVO based electrodes before and after cycling in two electrode configuration (Figure S8–S9); The cycling performance of LiVO, NaVO and KVO electrodes (Figure S10); The contribution ratio of capacitive process calculated from CV curves of KVO (Figure S11); The Nyquist plots of LiVO, NaVO and KVO in the three-electrode configuration (Figure S12); The electrochemical performance of KV3O8 electrode (Figure S13); TEM image, HRTEM image with SAED pattern, and STEM elemental mapping of KVO discharged to 0.2 V (Figure S14); The intercalation process of Zn2+ into the V–O interlayer spacing of KVO (Figure S15); The intercalation process of Zn2+ into the V–O interlayer spacing of LiVO and NaVO (Figure S16); The intercalation process of H+ into the V–O interlayer spacing of LiVO, NaVO and KVO (Figure S17) (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.1c00625/suppl_file/nz1c00625_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Superior potassium and zinc storage in K-doped VO 2 (B) spheres

Superior potassium and zinc storage in K-doped VO<sub>2</sub>(B) spheres

Potassium‐Ion Batteries: Surface Amorphization of Vanadium Dioxide (B) for K‐Ion Battery (Adv. Energy Mater. 23/2020)

Rich Alkali Ions Preintercalated Vanadium Oxides for Durable and Fast Zinc-Ion Storage

B-doped Layered VOPO4●2H2O Cathode for High-performance Zinc-Ion Batteries with H+/Zn2+ Co-insertion Mechanism

Surface Amorphization of Vanadium Dioxide (B) for K‐Ion Battery

Engineering VOx structure by integrating oxygen vacancies for improved zinc-ion storage based on cation-doping regulation with electric density

High-performance zinc-ion batteries enabled by electrochemically induced transformation of vanadium oxide cathodes

Engineering d-p orbital hybridization through regulation of interband energy separation for durable aqueous Zn//VO2(B) batteries

Pre-potassiated hydrated vanadium oxide as cathode for quasi-solid-state zinc-ion battery

Co‐Substitution Engineering Boosting the Kinetics and Stablity of VO2 for Zn Ion Batteries

In-situ electrochemical conversion of vanadium dioxide for enhanced zinc-ion storage with large voltage range

Potassium-Ion-Doped Manganese Oxides and Kaolinite Electrolyte Additives for Aqueous Zinc-Ion Batteries

Metal-organic-framework-derived Cobalt-Vanadium Oxides with Tunable Compositions for High-Performance Aqueous Zinc-Ion Batteries

Synergistic carbon and oxygen vacancy engineering on vanadium dioxide nanobelts for efficient aqueous zinc-ion batteries

Intercalation engineering of layered vanadyl phosphates for high performance zinc-ion batteries

Adjusting the Valence State of Vanadium in VO 2 (B) by Extracting Oxygen Anions for High‐Performance Aqueous Zinc‐Ion Batteries

Oxygen vacancies and heterointerface co-boosted Zn 2+ (De)intercalation kinetics in VO 2 for ultra-efficient aqueous zinc-ion batteries

Boosting Zn2+ Storage Kinetics by K-Doping of Sodium Vanadate for Zinc-Ion Batteries

Vanadate‐Based Fibrous Electrode Materials for High Performance Aqueous Zinc Ion Batteries

Facile Synthesis of Oxygen-Vacancy-Rich Li–K Coinsertion Vanadate Nanoflakes for High-Performance Zn-Ion Batteries