Abstract:The abundant reserve and low price of potassium resources promote K-ion batteries (KIBs) becoming a promising alternative to Li-ion batteries, while the large ionic radius of K-ions creates a formidable challenge for developing suitable electrodes. Here Ni-substituted Prussian blue analogues (PBAs) are investigated comprehensively as cathodes for KIBs. The synthesized K1.90Ni0.5Fe0.5[Fe(CN)6]0.89·0.42H2O (KNFHCF-1/2) takes advantage of the merits of high capacity from electrochemically active Fe-ions, outstanding electrochemical kinetics induced by decreased band gap and K-ion diffusion activation energy, and admirable structure stability from inert Ni-ions. Therefore, a high first capacity of 81.6 mAh·g–1 at 10 mA·g–1, an excellent rate property (53.4 mAh·g–1 at 500 mA·g–1), and a long-term lifespan over 1000 cycles with the lowest fading rate of 0.0177% per cycle at 100 mA·g–1 can be achieved for KNFHCF-1/2. The K-ion intercalation/deintercalation proceeds through a facile solid solution mechanism, allowing 1.5-electron transfer based on low- and high-spins FeII/FeIII couples, which is verified by ex situ XRD, XPS, and DFT calculations. The K-ion full battery is also demonstrated using a graphite anode with a high energy density of 282.7 Wh·kg–1. This work may promote more studies on PBA electrodes and accelerate the development of KIBs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsnano.0c02047?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsnano.0c02047</a>.Additional ICP-AES and elemental analysis results, XPS spectra, XRD and detailed refinement results, CV and charge/discharge curves, operating voltage profiles, volume energy density curves, comparison of the cycling stability of published cathode electrodes for KIBs, ex situ XRD patterns, EIS profiles, DOS results and electron band structures, XRD and electrochemical performances of graphite anode, as well as the comparison of energy density of reported nonaqueous K-ion full cells (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.0c02047/suppl_file/nn0c02047_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

First-principles study of bismuthene as a high energy density and excellent rate performance anode material for potassium-ion batteries

Encapsulating segment-like antimony nanorod in hollow carbon tube as long-lifespan, high-rate anodes for rechargeable K-ion batteries

Strategies to boost the electrochemical performance of bismuth anodes for potassium-ion batteries

A Porous Network of Bismuth Used as the Anode Material for High‐Energy‐Density Potassium‐Ion Batteries

First principles study of B7N5 as high capacity electrode material for K-ion batteries

Nitrogen-Rich Hard Carbon As A Highly Durable Anode for High-Power Potassium-Ion Batteries

A High-Volumetric-capacity Bismuth Nanosheet/graphene Electrode for Potassium Ion Batteries

Boron-Doped Pine-Cone Carbon With 3D Interconnected Porosity for Use as an Anode for Potassium-Ion Batteries With Long Life Cycle

Bismuth Telluride Nanoplates Hierarchically Confined by Graphene and N‐Doped C as Conversion‐Alloying Anode Materials for Potassium‐Ion Batteries

Bismuth oxychloride anchoring on graphene nanosheets as anode with a high relative energy density for potassium ion battery

Bismuthene for novel anode material of Magnesium/Zinc ion batteries with high capacity and stability: A DFT calculation

Advanced metal sulfide anode for potassium ion batteries

Recent Progress and Challenges on the Bismuth-Based Anode for Sodium-Ion Batteries and Potassium-Ion Batteries

Potassium Nickel Iron Hexacyanoferrate as Ultra-Long-Life Cathode Material for Potassium-Ion Batteries with High Energy Density

2D Bismuth@N‐Doped Carbon Sheets for Ultrahigh Rate and Stable Potassium Storage

Boron-Doped Graphene As a Promising Anode Material for Potassium-Ion Batteries with a Large Capacity, High Rate Performance, and Good Cycling Stability

From 0D to 3D: Dimensional Control of Bismuth for Potassium Storage with Superb Kinetics and Cycling Stability

Prediction of planar BxP Monolayer with inherent metallicity and its potential as an anode material for Na and K-Ion Batteries: A First-Principles Study

Ultrafine ZnS Nanoparticles in the Nitrogen-Doped Carbon Matrix for Long-Life and High-Stable Potassium-Ion Batteries

Few-Layer Bismuthene with Anisotropic Expansion for High-Areal-Capacity Sodium-Ion Batteries.

Birnessite Nanosheet Arrays with High K Content as a High‐Capacity and Ultrastable Cathode for K‐Ion Batteries