Abstract:To illustrate the microstructural factors of grain refinement for enhancing mechanical properties, the fine−/ultrafine-grained TWIP steels with a product of strength and elongation of ~71 GPa·% were first prepared by combining rolling and stress relief annealing. Subsequently, the evolution of dislocations, stacking faults, and associated substructures of the fine−/ultrafine-grained TWIP steels was analysed by using in-situ EBSD tensile tests and TEM characterisation of the interrupted strain experiments. The results reveal that the excellent mechanical properties of the TWIP steels are attributed to dislocations and associated dislocation cells, dislocation walls, dislocation tangles, stacking faults and associated Lomer-Cottrell locks (LCs), nano-twins, primary and secondary twins and their interactions during plastic deformation. The density of geometrically necessary dislocations (GNDs) was evaluated based on the modified Ashby's model and compared with experimental results, indicating that grain size heterogeneity can promote the accumulation of GNDs, which facilitates the generation of subgrains and new boundaries to reduce the mean free path (MFP) of dislocations, thus enhancing strain hardening. Meanwhile, the interaction of lamellar primary and secondary twins in fine grains and the generation of stacking faults and nano-twins in ultrafine grains at higher strains can further promote strain hardening to elevate strength. Furthermore, the effects of grain orientation and grain size on the activation and evolution of dislocations and twins were elucidated. In ultrafine grains, twinning is strongly inhibited due to the elevated critical shear stress for twinning, resulting in more stacking faults and nano-twins, but fewer dislocation cells. The present work contributes to an in-depth understanding of the mechanical properties of fine−/ultrafine-grained materials to exploit their potential for industrial applications.

Grain-refining and Strengthening Mechanisms of Bulk Ultrafine Grained CP-Ti Processed by L-ECAP and MDF

Microstructures and mechanical deformation behaviors of ultrafine-grained commercial pure (grade 3) Ti processed by two-step severe plastic deformation

Microstructural Modification and Mechanical Improvement of Ultrafine-Grained Ti Alloy Through Electron Wind Force: an Innovative Approach

Tension-Compression Asymmetry in Ultrafine-grained Commercially Pure Ti Processed by ECAP

Ultrafine Processing of (tib+tic)/tc18 Composites Processed by ECAP Via Bc Route

Three-dimensional numerical analysis and experimental investigation of grain refinement in multi-pass equal channel angular pressing for round-workpieces

Microstructural evolution in titanium matrix composites processed by multi-pass equal-channel angular pressing

Microstructural evolution and mechanical properties of AZ31 Mg alloy fabricated by a novel bifurcation-equal channel angular pressing

Delving into the intrinsic co-relation between microstructure and mechanical behaviour of fine−/ultrafine-grained TWIP steels via TEM and in-situ EBSD observation

Grain Refinement and Strengthening of an Aluminum Alloy Subjected to Severe Plastic Deformation through Equal-Channel Angular Pressing

Microstructure and mechanical properties of ultrafine grained IF steel processed by equal channel angular pressing

High-cycle-fatigue Induced Continuous Grain Growth in Ultrafine-Grained Titanium

MICROSTRUCTURE AND MECHANICAL PROPERTIES OF TiB + TiC REINFORCED TITANIUM ALLOY BY ECAP

Microstructure Evolution and Mechanical Properties of Fcc Metallic Materials Subjected to Equal Channel Angular Pressing

Enhancing mechanical properties and microstructure evolution of hybrid AZ61-5SiC-0.5CNTs composite during equal channel angular pressing

Effect of Abnormal Grain Refinement on Synchronous Strengthening Behavior of Fe50Mn30Co10Cr10 High Entropy Alloys

Microstructural Evolution and Properties of Particle Reinforced Titanium Matrix Composites Processed by Severe Plastic Deformation

Experimental Study on Pure Copper Subjected to Different Severe Plastic Deformation Modes

Preparation of UFG-Ti by ECAP at the Normal Temperature and Research of Mechanical Properties

Improvement of Strength and Ductility of Mg-Zn-Ca-Mn Alloy by Equal Channel Angular Pressing

Mechanical responses, texture and microstructural evolution of high purity aluminum deformed by equal channel angular pressing