Abstract:Multi-pass flow forming processes are one of the major approaches to producing thin-walled titanium cylindrical parts with large cross-sections in which microstructure characteristics have a significant effect on the tailoring of desirable properties. In this study, the microstructure evolution of the Ti-6Al-2Zr-1Mo-1V alloy and its mechanism in a multi-pass flow forming process are systematically studied based on the deformation characteristics during the process. The results show that waved grains formed in the process are due to the compressive stress in the rolling direction (RD) and the non-uniform stress field in the deformation area. With the compression and shear deformation induced in multi-pass flow forming, non-standard {0002} basal plane texture is formed whose {0002} poles are tilted from the normal direction (ND) to the RD and the circumferential direction (CD) with an angle of 20° and 30°, respectively. It is found that α grains are refined by two mechanisms, viz., continuous dynamic recrystallization (CDRX) and deformation-induced intense and localized shearing (DILS). CDRX mainly promotes secondary α grain refinement, while DILS has significant effects on primary α grain refinement under the larger deformation and on secondary α grain refinement during the entire process. Meanwhile, the grains refined by DILS with different orientations facilitate further deformation. This effect of grain refinement leads to improvement of the yield strength in the RD and the CD by 12.42% and 19.05%, respectively, compared annealed samples of the cylindrical part with the original one. These findings provide a basis for microstructure control and property tailoring of Ti-6Al-2Zr-1Mo-1V cylindrical parts in flow forming processes.

Microstructures and mechanical deformation behaviors of ultrafine-grained commercial pure (grade 3) Ti processed by two-step severe plastic deformation

A Comparative Study on the Microstructure and Mechanical Behavior of Titanium: Ultrafine Grain Vs. Coarse Grain

High-cycle-fatigue Induced Continuous Grain Growth in Ultrafine-Grained Titanium

Microstructural Evolution and Mechanical Properties of Ultrafine‐Grained Ti Fabricated by Cryorolling and Subsequent Annealing

Deformation Behavior and Plastic Instabilities of Ultrafine-Grained Titanium

Deformation Mechanism and In-Situ TEM Compression Behavior of TB8 Β Titanium Alloy with Gradient Structure

Plasticity and Deformation Mechanisms of Ultrafine-Grained Ti in Necking Region Revealed by Digital Image Correlation Technique

Deformation and Fracture Mechanisms of Gradient Nanograined Pure Ti Produced by a Surface Rolling Treatment

Microstructural Modification and Mechanical Improvement of Ultrafine-Grained Ti Alloy Through Electron Wind Force: an Innovative Approach

Microstructure Evolution of Ti-6Al-2Zr-1Mo-1V Alloy and Its Mechanism in Multi-Pass Flow Forming

Grain-refining and Strengthening Mechanisms of Bulk Ultrafine Grained CP-Ti Processed by L-ECAP and MDF

Microstructure and texture evolution in ultrafine-grained pure Ti processed by equal-channel angular pressing with subsequent dynamic compression

Compressive deformation behaviors of coarse- and ultrafine-grained pure titanium at different temperatures: A comparative study

Microstructures and mechanical properties of commercial purity Ti rolled at room temperature

Texture Analysis of Commercial Pure (grade 3) Ti after Two-Step Severe Plastic Deformation

Ultrafine-grained Ti–Nb–Ta–Zr Alloy Produced by ECAP at Room Temperature

A comparison of temperature-dependent compressive deformation features of ultrafine-grained Ti and Cu produced by ECAP

Microstructure and microhardness evolution of Ti-10V-2Fe-3Al alloy under tensile/torsional deformation modes

High-temperature Deformation Mechanism of Γ-Tial-based Alloy with Ultrafine Grains

The Study of Microstructure and Properties of Ultrafine-Grained TWIP Steel with Heavily Deformation

Effects of Temperature and Strain Rate on Compressive Mechanical Properties of Ultrafine-Grained CP Titanium