Abstract:In the present work, (TiBw+TiCp)/Ti6242 composites with TiB:TiC=1:1 were produced by common casting and hot-forging technology utilizing the SHS reactions between titanium and B4C, C powder. The microstructures of composites were examined using optical microscopy (OM) and transmission electron microscopy (TEM). The X-ray diffraction (XRD) was used to identify the phases that were present in the composites. There are three phases — TiB, TiC and titanium matrix alloy. TiB grows in short-fiber shape, whereas TiC grows in dendritic, equiaxed or near-equiaxed shape. TiB whiskers were made to align the longitudinal direction and TiC dendritic was broken up after hot-forging. The reinforcements are distributed uniformly in matrix alloy. The interfaces between reinforcements and titanium matrix alloy are very clean. The tensile strength (yield strength and ultimate tensile strength) and the Young's modulus improve with the addition of TiB whiskers and TiC particles although some reduction in ductility is observed. (TiBw+TiCp)/Ti6242 composites with TiB:TiC=4:1 will fracture on a lower level of applied stain due to deformation restraint of TiB whiskers on titanium matrix alloy. The (TiBw+TiCp)/Ti6242 composites with TiB:TiC=1:1 show higher tensile strength and ductility. The addition of graphite not only improves the tensile strength and the Young's modulus but also increases the ductility. The improved Young's moduli and increased tensile strengths of the composites are explained using shear lag and rule-of mixtures theories. The Young's moduli of the composites were found in good agreement with that calculated from Tsai–Halpin equation applied for discontinuous-reinforced composites.

MICROSTRUCTURE AND MECHANICAL PROPERTIES OF TiB + TiC REINFORCED TITANIUM ALLOY BY ECAP

Effect of ECAP numbers on microstructure and properties of titanium matrix composite

Mechanical And Microstructure Evaluation Of In-Situ Titanium Matrix Composite Processed By Severe Plastic Deformation

Microstructure evolution and mechanical properties of TiB2/Cu composites processed by equal channel angular pressing at elevated temperature

The Effect of Severe Plastic Deformation on the Microstructure and Mechanical Properties of (tib+tic) Reinforced Titanium Matrix Composites

Microstructure Characteristics of ECAP-processed (tib + La2O3)/Ti-6Al-4V Composites

Ultrafine Processing of (tib+tic)/tc18 Composites Processed by ECAP Via Bc Route

The Severe Plastic Deformation of Discontinuous TiB plus TiC Reinforced Titanium Matrix Composites

Microstructural Evolution and Properties of Particle Reinforced Titanium Matrix Composites Processed by Severe Plastic Deformation

Microstructural evolution in titanium matrix composites processed by multi-pass equal-channel angular pressing

Effect of Temperature on Microstructure and Mechanical Properties of ECAPed (tib + La2O3)/Ti-6Al-4V Composites

Evolution of microstructure, macrotexture and mechanical properties of high strength biomedical TA4 pure titanium during multi-pass ECAP

Microstructure and Mechanical Properties of in Situ Synthesised (Tic+tib)/ti-6Al-4v Composites Prepared by Powder Metallurgy

Microstructure Evolution and Tensile Properties of In Situ TiB2(p)/Al-Cu Composite Processed by Modified Strain-Induced Melt Activation Method with Equal Channel Angular Pressing Pre-deformation

Microstructure Evolution and Mechanical Properties of a Ti–35Nb–3Zr–2Ta Biomedical Alloy Processed by Equal Channel Angular Pressing (ECAP)

Effect of TiC Content on Microstructure and Mechanical Properties of High-temperature Titanium Matrix Composites

Microstructure and Tensile Properties of in Situ (tib+tic)/ti6242 (tib:Tic=1:1) Composites Prepared by Common Casting Technique

INFLUENCE OF ECAP TEMPERATURE ON THE MECHANICAL PROPERTIES OF PURE TI

Effect of Ti addition on microstructure and mechanical properties of Zn-22Al alloy after ECAP

Understanding the Role of Multi-scale Reinforcements on Severe Plastic Deformation of Titanium Matrix Composites

Effect of (α + Β) Heat Treatment on Microstructure and Mechanical Properties of (tib + TiC)/Ti–B20 Matrix Composite