Abstract:We tested and compared the stability and usability of three different cathode materials and configurations in a thermionic-based ultrafast electron microscope: (1) on-axis thermionic and photoemission from a 0.1-mm diameter LaB6 source with graphite guard ring, (2) off-axis photoemission from the Ni aperture surface of the Wehnelt electrode, and (3) on-axis thermionic and photoemission from a 0.2-mm diameter polycrystalline Ta source. For each cathode type and configuration, we illustrate how the photoelectron beam-current stability is deleteriously impacted by simultaneous cooling of the source following thermionic heating. Further, we demonstrate usability via collection of parallel- and convergent-beam electron diffraction patterns and by formation of optimum probe size. We find that usability of the off-axis Ni Wehnelt-aperture photoemission is at least comparable to on-axis LaB6 thermionic emission, as well as to on-axis photoemission. However, the stability and achievable beam currents for off-axis photoemission from the Wehnelt aperture were superior to that of the other cathode types and configurations, regardless of the electron-emission mechanism. Beam-current stability for this configuration was found to be within 1% of the mean for 70 minutes (longest duration tested), and steady-state beam current was reached within the sampling-time resolution used here (~1 s) for 15 pA beam currents (i.e., 460 electrons per packet for a 200 kHz repetition rate). Repeatability and robustness of the steady-state condition was also found to be within 1% of the mean. We discuss the implications of these findings for UEM imaging and diffraction experiments, for pulsed-beam damage measurements, and for practical switching between optimum conventional TEM and UEM operation within the same instrument.

Exploration on application of photoelectron emission spectrometer in teaching experiments

New Approaches in Teaching Spectroscopy Technique and Application Classes: History, Experiments and Frontier Lectures

Ultraviolet Interferometric Spectroscopy for Real-Time Detection of Elemental Mercury

DEVELOPMENT STUDY OF (e,2e) ELECTRON MOMENTUM SPECTROMETER AND MEASUREMENT OF ELECTRON-MOMENTUM SPECTRUM OF SEVERAL ATOMS AND MOLECULARS

Educational microwave EPR spectrometer

Discussion of Improving Energy of 4600 Atomic Absorption Spectrophotometer with a Tandem Atomizer

Application of X-ray photoelectron spectroscopy:detection and analysis of special sample and complex spectrum

Development of Novel Microwave Plasma Torch Spectrometer

Multipurpose DIY Spectrophotometer for Teaching Analytical Chemistry

Do it yourself: optical spectrometer for physics undergraduate instruction in nanomaterial characterization

(E, 2e) Electron Momentum Spectrometer With High Sensitivity And High Resolution

Development of a laboratory system hard X-ray photoelectron spectroscopy and its applications

Application of atomic absorption spectrometry to the analysis of molecular spectra. I. Study on the theory and technical feasibility

Development of Electron Energy-Loss Spectroscopy for Nanoscience.

Angle-resolved photoelectron spectroscopy in a low energy electron microscope

Progress on Electron Momentum Spectroscopy Studies at Tsinghua University in Beijing

Development of Secondary Ion Mass Spectrometry

Parallel Data Acquisition System for Electron Momentum Spectrometer

Tunable Deep Ultraviolet Laser Based Near Ambient Pressure Photoemission Electron Microscope for Surface Imaging in the Millibar Regime.

Mass and photoelectron spectrometer for studying field-induced ionization of molecules

Wehnelt Photoemission in an Ultrafast Electron Microscope: Stability and Usability