Abstract:Full tensile structures (such as cable domes, cable networks and cable trusses) are structures that only consist of cables and struts.There are three steps in its onsite construction: (1) assembly and connection, (2) towing and lifting and (3) tensioning and shaping.During construction process, the structure may suffer from large mechanism displacement and cable slack, so its initial shape was far from equilibrium.The form-finding analysis is a major difficulty in the construction process analysis.In this paper, we propose a new method for static equilibrium form-finding analysis of a cable-strut system based on a nonlinear dynamic finite element method and introduce virtual inertia and viscous damping force, as well as a series analysis techniques and a multi-step continuous solver.When the total system kinetic energy reaches its peak, the finite element model is updated, and the dynamic equilibria gradually converge to a static equilibrium state through iterative updating.To improve the analysis efficiency, stability and accuracy, key technical measures are proposed for time-step lengths, total energy peak value, model updating, convergence criteria and static equilibrium verification.In the case of the rigid cable dome in Wuxi New District Science and Technology Exchange Centre in China, we used this method to perform the mechanical analysis during the integral tow-lifting and tensioning process, and the project corresponded with our analysis.Meanwhile, we have to mention that during the construction process of integral tow-lifting, an inflection point exists in the adjustment phase, at which point the configuration stability is the worst and struts can fall sideways.Especially, for cable domes with a high rise-span ratio, the stability at the inflection point needs to be addressed.

Construction analysis on integral lifting of steel structure by the vector form intrinsic finite element

Application of vector form intrinsic finite element method to static analysis of cable domes

Construction Process Internal Forces and Displacements Superimposed Analysis Method and Application

Vector form intrinsic finite element analysis based on fine beam model

T-element based on vector form intrinsic fininte element and its application to tensile cable-membrane structures

Construction analysis of cable-strut tensile structures based on vector form intrinsic finite element

Inverse analysis method for calculating cable tension based on controlling the initial length of cables

Spatial Fine Beam Model Based on Vector Form Intrinsic Finite Element Analysis

TRIANGULAR THIN-PLATE ELEMENT BASED ON VECTOR FORM INTRINSIC FINITE ELEMENT

Non-linear force method for buckling path analysis of space trusses with Vector Form Intrinsic Finite Element

THE INFLUENCE OF LINEAR AND NON LINEAR FACTORS ON THE CONSTRUCTION CONTROL ANALYSIS OF CABLE-STAYED BRIDGES

Nonlinear Static Analysis Of Space Trusses Using Vector Mechanics Of Structure

Elastoplastic Analysis with Fine Beam Model of Vector Form Intrinsic Finite Element

THEORETICAL ANALYSIS OF CONSTRUCTION PROCEDURES OF CABLE-DOMES

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

Calculation of stayed-buckle cable forces for concrete-filled steel tubular arch bridge with long span in process of lifting

Finite Particle Method for Kinematically Indeterminate Bar Assemblies

Vector form intrinsic finite element method for buckling analysis of thin-shell structures

Integral Lifting of a Three-Span Continuous Beam Bridge

WIND-INDUCED DYNAMIC RESPONSE OF TRANSMISSION TOWER USING VECTOR-FORM INTRINSIC FINITE ELEMENT METHOD

STATIC EQUILIBRIUM FORM-FINDING ANALYSIS OF CABLE-STRUT SYSTEM BASED ON NONLINEAR DYNAMIC FINITE ELEMENT METHOD