Abstract:This paper presents the findings from an experimental investigation that was conducted to assess the shear behavior and the changes in the shear behavior and strength parameters for cemented paste backfill (CPB)–CPB interface as well as the effects of key influential factors (normal stress, curing time, interface roughness, and tailings) on the shear characteristics at the CPB–CPB interface. An extensive program of direct shear tests and microstructural analysis will be conducted to gain insights into the shear behavior at the CPB–CPB interface and the fundamental processes that are responsible for the observed behavior. The results show that the shear characteristics at the CPB–CPB interface are a function of the curing time (degree of cementation), the surface roughness of the CPB, normal stress, and chemical composition of the tailings. The shear behavior of a rough CPB–CPB interface is different from that of a smooth interface. A stress hysteresis loop was observed, and the prepeak linear phase of the shear stress–shear displacement response was an elastoplastic process. The shear failure at the CPB–CPB interface follows Mohr–Coulomb failure criterion. In addition, it was found that the CPB–CPB interface was not necessarily a weak plane with respect to the shear failure of the CPB structure. The shear strength at the CPB–CPB interface could be higher than that of the control CPB material (backfill without an interface) and depends on the surface roughness of the CPB and the curing time. An index of the transition curing time for the CPB–CPB interface was proposed to evaluate when the backfill structure would fail first along the CPB–CPB interface. The results presented in this paper will contribute to a better understanding of the shear behavior and the changes in the shear strength parameters of the CPB–CPB interface and guide the development of a constitutive equation for backfill structures that have an interface as well as providing a more cost-effective design for CPB structures.

Shear strength evaluation method for soil-bentonite cutoff wall backfill based on CPTU test

A Method for Determining Critical Thickness of Base Soil of Foundation Pit Subjected to Confined Water

Field test on the stress state and consolidation behavior of soil-bentonite cutoff walls

Study of mechanical properties of soil-cement mixture for a cutoff wall

Undrained Shear Strength Assessments for Clay of the Offshore Wind Power Projects in Vietnam

A Novel Method for Estimating the Undrained Shear Strength of Marine Soil Based on CPTU Tests

Experimental Study Of Correlation Of Dynamic Compaction For Foundation Backfilled With Crushed Stone

Centrifuge Modeling of Backfill Consolidation in Soil-bentonite Cutoff Walls

Non-monotonic Piezocone Dissipation Curves of Backfills in a Soil-Bentonite Slurry Trench Cutoff Wall

Force Equilibrium–Based Model for Predicting Stresses in Soil-Bentonite Cutoff Walls

VARIATION OF THE SHEAR STRENGTH OF XIAMEN UNSATURATED RESIDUAL SOILS WITH WATER CONTENT

Experimental study on new variety of cement-stabilized soil

Experimental Study on Engineering Properties of Cemented Soil with High Water Content

Numerical Analysis of Consolidation Behavior of Soil-Bentonite Backfill in a Full-Scale Slurry Trench Cutoff Wall Test

Water Retention Behavior and Shear Strength of Artificially Cemented Granite Residual Soil Subjected to Free Drying

In Situ Stress States and Lateral Deformations of Soil–bentonite Cutoff Walls During Consolidation Process

Engineering Characteristics and Microscopic Mechanism of Soil–Cement–Bentonite (SCB) Cut-Off Wall Backfills with a Fixed Fluidity

Consolidation Behaviors of Soil-Bentonite Slurry Trench Cutoff Walls: a Large-Scale Test

Undrained triaxial tests with pre-consolidation under effective overburden pressures

A Penetration Processing Study of Piezocone Penetration Test in Cutoff Wall

Interface Shear Behavior of Cementing Underground Mine Backfill