Abstract:Large underground voids created by removal of ore are usually backfilled with mill tailings. The stress state in the backfill must be estimated to ensure safety. Most of the existing analytical solutions for estimating stress at any depth within mine fills had adopted the assumption of uniform vertical stress. However, this assumption does not make for a valid hypothesis. This paper presents an analytical solution to estimate the stress state in vertical backfilled stopes with stress patterns of distribution in the fill considered. The trajectory of minor principal stress in the fill from the centerline to the wall was assumed to be either a circular-arc, parabola, or catenary. The direction of the minor principal stress at the centerline was vertical to the centerline, and the direction along the rock mass was determined using the geometrical relationship of Mohr's stress circle. The stress states of the differential flat elements in the backfill were analyzed through equilibrium considerations. Then, the analytical solution for estimating the stress state in the backfill was obtained. A series of examples are presented and compared with existing analytical solutions and numerical results carried out in ABAQUS (version 6.13). A nonuniform stress distribution across the backfill width is also presented. The vertical normal stress component at the centerline was greater than that along the wall. The stress state in the backfill was affected by the friction angle and cohesive strength of the backfill soils, friction angle at the wall interface, and trajectory of the minor principal stress. A discussion is presented after the comparison of numerical and analytical results and addresses the limitations of the proposed analytical solutions.

Force Equilibrium–Based Model for Predicting Stresses in Soil-Bentonite Cutoff Walls

Physical Derivation of Effective Stress from Balance Law and Experimental Evidence

Constitutive Modeling of Physical Properties of Coastal Sand During Tunneling Construction Disturbance

Computational Method for Active Earth Pressure of Cohesive Soil under Nonlimit State

Investigation of Excavation Characters and Basal Stability with Considering Soil Hardening Behavior

A Modified Wedge-Prism Model for Calculating the Limit Support Pressure of a Shallow Shield Tunnel Face in Unsaturated Sandy Soil

Field test on the stress state and consolidation behavior of soil-bentonite cutoff walls

Numerical Analysis of Consolidation Behavior of Soil-Bentonite Backfill in a Full-Scale Slurry Trench Cutoff Wall Test

Centrifuge Modeling of Backfill Consolidation in Soil-bentonite Cutoff Walls

Active earth pressures against rigid retaining walls with narrow cohesive backfill

In Situ Stress States and Lateral Deformations of Soil–bentonite Cutoff Walls During Consolidation Process

Numerical analysis of active earth pressure on rigid retaining wall

Hyperbolic Stress-Strain Behaviour of Sandy Soil under Plane Strain Unloading Condition and Its Application on Predicting Displacement-Dependent Active Earth Pressure

Study of Mechanics Behavior and Constitutive Model of Cemented Soil under Static Triaxial Tests

Consolidation Behaviors of Soil-Bentonite Slurry Trench Cutoff Walls: a Large-Scale Test

Study of Passive Earth Pressures Against Translating Rigid Retaining Walls in Narrow Excavations

Analytical Solution for Estimating the Stress State in Backfill Considering Patterns of Stress Distribution

Lateral Earth Pressure Considering the Displacement of a Rigid Retaining Wall

A novel elasto-viscoplastic constitutive model for predicting the embankment settlement on soft structured clay

Analytical solution for displacement-dependent 3D earth pressure on flexible walls of foundation pits in layered cohesive soil

Analytical approach to predict tunneling-induced subsurface settlement in sand considering soil arching effect