Abstract:The established linear fatigue life prediction model based on the Miner rule has been widely applied to fatigue life prediction under constant amplitude uniaxial and multiaxial loading. Considering the physical significance of crack formation and propagation, a multiaxial equivalent linear fatigue life prediction model is put forward based on Miner rule and critical plane method under constant amplitude loading. The essence of this approach is that the equivalent strain, which consists of the shear strain and normal strain on the critical plane, replaces the relevant parameter of uniaxial nonlinear fatigue damage model. The principal axes of stress/strain rotate under non-proportional loading. Meanwhile, the microstructure of material and slip systems change, which lead to additional hardening effect. The ratio of cyclic yield stress to static yield stress is used to represent the cyclic hardening capacity of material, and the influence of phase difference and loading condition on the non-proportional hardening effect is considered. The multiaxial fatigue life is predicted using equivalent stain approach, maximum shear stain amplitude model, CXH model, and equivalent multiaxial liner model under proportional and/or non-proportional loading. The smooth and notched fatigue specimens of four kinds of materials (Q235B steel, titanium alloy TC4, Haynes 188, and Mod.9Cr-1Mo steel) are used in the multiaxial fatigue experiments to verify the proposed model. The predicted results of these materials are compared with the test results, and the results show that these four models can achieve good effect under proportional loading, but the proposed model performs better than the other three models under non-proportional loading. Meanwhile, it also verifies that the proposed enhancement factor can reflect the influence of phase difference and material properties on additional hardening.

Multi-scale fatigue damage model for micro-cracks nucleation and growth and its application

A Model for Ultra Low Cycle Fatigue Damage Prediction of Structural Steel

Improvement Of Cyclic Void Growth Model For Ultra-Low Cycle Fatigue Prediction Of Steel Bridge Piers

Mechanistic Modeling of Fatigue Crack Growth in Asphalt Fine Aggregate Matrix under Torsional Shear Cyclic Load

Improved Ultra-Low Cycle Fatigue Fracture Models for Structural Steels Considering the Dependence of Cyclic Damage Degradation Parameters on Stress Triaxiality

A novel two-scale nonlinear damage accumulation model for vibration fatigue life prediction

Probabilistic damage tolerance assessment method based on the multi-scale crack growth model

Investigation of the heat energy and multi‐level load on subsurface fatigue damage evolution via multi‐scale method

Multi-Stage Hybrid Loading Fatigue Life Prediction Study

Microstructural Damage Mechanics-Based Model for Creep Fracture of 9%cr Steel under Prior Fatigue Loading

A unified stochastic damage model for concrete under monotonic and fatigue loading

Accumulated crystal plasticity dissipation energy driven continuum damage two-scale model for fretting fatigue initiation life

Two-Scale Analysis of Fretting Fatigue crack initiation in heterogeneous materials using Continuum Damage Mechanics Approach

Life Prediction of Corrosion-Fatigue Based on a New Crack Growth Rate Model with Damage and the Extended Finite Element Method

Damage Evolution Model Considering Fatigue Failure Factor Under Multiaxial Non-Proportional Loading

An engineering model of fatigue crack growth under variable amplitude loading

Fatigue crack growth prediction model under variable amplitude loading conditions

Physical description and model validation of welded joint fatigue damage evolution

A new multiaxial fatigue life prediction model considering additional hardening effect

Multi-scale fatigue damage prognosis for long-span steel bridges under vehicle loading

Multiaxial Fatigue Life Prediction Based on Nonlinear Continuum Damage Mechanics and Critical Plane Method