Exergy analysis of dimethyl ether synthesis via biomass gasification

Lulu Chen,Jun Xiao,Guohui Song,Shouzhen Bu,Laihong Shen
DOI: https://doi.org/10.3969/j.issn.1001-0505.2014.02.016
2014-01-01
Abstract:Based on the simulation of dimethyl ether (DME)synthesis from biomass gasification in interconnected fluidized beds using Aspen Plus,the exergy analysis of the DME synthesis system is performed.And the effects of operation parameters on the exergy efficiencies are studied.The re-sults show that the most exergy loss occurs in the gasification subsystem,and the system can reach the maximum exergy efficiency when the H2/CO molar ratio is about 2 .It is beneficial for the exer-gy efficiency of the liquefaction subsystem to improve conversion of syngas to DME by one-step and reduce the recycle gas ratio.In addition,the exergy loss of the whole system is mainly caused by the process irreversibility,and the internal exergy loss accounts for nearly 80% of all exergy loss.It is suggested that for the purpose of DME production,the operation parameters be controlled at a gasifica-tion temperature of 750 to 800 ℃,a steam and biomass ratio of 0.3,the liquefaction temperature of 260 to 280℃,and the liquefaction pressure of 4.0 to 4.5 MPa.And with the above-mentioned condi-tions,the yield of DME can reach 6.20 mol/kg and the total exergy efficiency can reach 51.66%.
What problem does this paper attempt to address?