Abstract:In this study, we examined the thermal effects throughout the process of the placement of span-scale girder segments on a 6×110-m continuous steel box girder in the Hong Kong-Zhuhai-Macao Bridge. Firstly, when a span-scale girder segment is temporarily stored in the open air, temperature gradients will significantly increase the maximum reaction force on temporary supports and cause local buckling at the bottom of the girder segment. Secondly, due to the temperature difference of the girder segments before and after girth-welding, some residual thermal deflections will appear on the girder segments because the boundary conditions of the structure are changed by the girth-welding. Thirdly, the thermal expansion and thermal bending of girder segments will cause movement and rotation of bearings, which must be considered in setting bearings. We propose control measures for these problems based on finite element method simulation with field-measured temperatures. The local buckling during open-air storage can be avoided by reasonably determining the appropriate positions of temporary supports using analysis of overall and local stresses. The residual thermal deflections can be overcome by performing girth-welding during a period when the vertical temperature difference of the girder is within 1 °C, such as after 22:00. Some formulas are proposed to determine the pre-set distances for bearings, in which the movement and rotation of the bearings due to dead loads and thermal loads are considered. Finally, the feasibility of these control measures in the placement of span-scale girder segments on a real continuous girder was verified: no local buckling was observed during open-air storage; the residual thermal deflections after girth-welding were controlled within 5 mm and the residual pre-set distances of bearings when the whole continuous girder reached its design state were controlled within 20 mm.

Temperature field and thermal deformation of steel bridge deck during gussasphalt pavement paving

Control Measures for Thermal Effects During Placement of Span-Scale Girder Segments on Continuous Steel Box Girder Bridges

Temperature Field Characteristics and Cooling Measures of Steel Box Girder of Cross-Sea Bridge

Temperature Field and Stress Field of Prestressed Concrete Box-Girder Bridge

Study On Dynamic Response Characteristics Of Saturated Asphalt Pavement Under Multi-Field Coupling

Numerical Analysis for Basalt Fiber Reinforced High-Viscosity Asphalt Concrete Bridge Deck Pavement

Effect of Asphalt Bridge Deck Pavement Depth on Beam Temperature Gradient Stress of Continuous Rigid Frame Bridges

Research on Permanent Deformation of Asphalt Pavement Considering Pavement Temperature Distribution

Research on Effect of Bridge-deck Pavement on Temperature Gradient

Thermal Effect on Rheological Properties of Epoxy Asphalt Mixture and Stress Prediction for Bridge Deck Paving

Application of Heavy Traffic Steel Bridge Deck Pavement for the Areas Hotin Summer and Cold in Winter

Fatigue Performance Evaluation for an Orthotropic Steel Bridge Deck Based on Field Hotspot Stress Measurements

Load Analysis on Asphalt Concrete Deck Pavement With Submodel Method

Field measurement and numerical simulation on vertical temperature gradient of steel box girders

Research on the Behavior of Rigid Pavement of Basalt Fiber Reinforced Dowel Bar under the Condition of Variable Temperature

Temperature distribution of asphalt bridge deck pavement with groundwater circulation temperature control system under high- and low-temperature conditions

Analysis of Temperature Stress in Bridges Considering Vertical and Transverse Temperature Gradient

Analysis of Viscoelastic Mechanical Response of Asphalt Mixture Pavement on Steel Deck under Imperfect Contact Conditions

Evaluation Method of Fatigue Life for Asphalt Pavement on the Steel Bridge Deck Based on the Inhomogeneous Poisson Stochastic Process

Effect of Temperature on the Fatigue Life Assessment of Suspension Bridge Steel Deck Welds under Dynamic Vehicle Loading

Thermally Induced Stresses in Concrete Pavement on Concrete Bridge