Abstract:In this study, we examined the thermal effects throughout the process of the placement of span-scale girder segments on a 6×110-m continuous steel box girder in the Hong Kong-Zhuhai-Macao Bridge. Firstly, when a span-scale girder segment is temporarily stored in the open air, temperature gradients will significantly increase the maximum reaction force on temporary supports and cause local buckling at the bottom of the girder segment. Secondly, due to the temperature difference of the girder segments before and after girth-welding, some residual thermal deflections will appear on the girder segments because the boundary conditions of the structure are changed by the girth-welding. Thirdly, the thermal expansion and thermal bending of girder segments will cause movement and rotation of bearings, which must be considered in setting bearings. We propose control measures for these problems based on finite element method simulation with field-measured temperatures. The local buckling during open-air storage can be avoided by reasonably determining the appropriate positions of temporary supports using analysis of overall and local stresses. The residual thermal deflections can be overcome by performing girth-welding during a period when the vertical temperature difference of the girder is within 1 °C, such as after 22:00. Some formulas are proposed to determine the pre-set distances for bearings, in which the movement and rotation of the bearings due to dead loads and thermal loads are considered. Finally, the feasibility of these control measures in the placement of span-scale girder segments on a real continuous girder was verified: no local buckling was observed during open-air storage; the residual thermal deflections after girth-welding were controlled within 5 mm and the residual pre-set distances of bearings when the whole continuous girder reached its design state were controlled within 20 mm.

Field measurement and numerical simulation on vertical temperature gradient of steel box girders

Control Measures for Thermal Effects During Placement of Span-Scale Girder Segments on Continuous Steel Box Girder Bridges

Evaluation of Thermal Effects on Cable Forces of a Long-Span Prestressed Concrete Cable–Stayed Bridge

Temperature Field Characteristics and Cooling Measures of Steel Box Girder of Cross-Sea Bridge

Temperature Field and Stress Field of Prestressed Concrete Box-Girder Bridge

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Analysis of Temperature Stress in Bridges Considering Vertical and Transverse Temperature Gradient

Investigation of temperature effects on wide steel box girder of suspension bridge based on long-term monitoring data

Numerical analysis on the time-varying temperature field distribution patterns of ballastless track steel-concrete composite box girders at ambient temperature based on field measurements

Experimental and numerical investigation on the temperature distribution of composite box‐girders with corrugated steel webs

Thermal load models for the static design of steel-concrete composite girders

Temperature Field Boundary Conditions and Lateral Temperature Gradient Effect on a PC Box-Girder Bridge Based on Real-Time Solar Radiation and Spatial Temperature Monitoring

Analysis of Vertical Temperature Gradients and Their Effects on Hybrid Girder Cable-Stayed Bridges

Thermal Simulation on the Flat Steel Box Girder of the Maputo Bridge under Solar Radiation

Experimental and statistical investigation on temperature gradient of CFST truss chords

Modeling of Temperature Distribution in a Reinforced Concrete Supertall Structure Based on Structural Health Monitoring Data

Temperature gradient estimation of long-span concrete box girders using average conditional exceedance rate function

Investigation of temperature-induced effect on rail-road suspension bridges during operation

Temperature analysis and prediction for road-rail steel truss cable-stayed bridges based on the structural health monitoring

Global temperature behavior monitoring and analysis of a three-tower cable-stayed bridge

Thermal Effect on Dynamic Characteristics of Concrete Girder Bridges