Abstract:This paper introduces an innovative internal configuration for the reinforced concrete masonry shear wall to improve seismic performance. A cyclic loading and monotonic loading test were carried out on reinforced concrete masonry shear walls with large cross-section core columns to study the in-plane response. The test walls’ crack patterns, deformation characteristics, and failure characteristics were similar to those of a slit shear wall, which indicated a dislocation between core columns. The cyclic loading test results showed that the test walls’ lateral bearing capacity was between 400 and 500 kN, the ultimate drift generally around 3%, and the equivalent viscous damping ratio with a non-linear response was found around 12%. Therefore, the test walls had ideal energy dissipation capacity as well as the lateral bearing capacity. According to the similarity phenomenon between the cyclic loading test and the monotonic loading test, three resistance mechanisms were proposed to explain the in-plane response of the wall, namely the core column-rotation mechanism, wall-rotation mechanism, and connector-shear mechanism. Based on the failure sequence of these resistance mechanisms, the intact wall was divided into two functional parts. One part was the masonry part, and the other part was the inner frame. The masonry part maintained integrity and required stiffness, and the inner frame dominated the in-plane response.

Calculation Analysis of Bearing Capacity and Deformation of Masonry Shearwall with Reinforced Frame

Simulation Of Collapse Process Of Masonry Walls Based On Expanded Discrete Element Method

A Static Nonlinear Analysis of Confined Brickmasonry Walls in a Multistory Building with a Large-Bay

Experimental Studies on Bearing Capacity of Reinforced Block Short-Leg Masonry Shear Wall under Eccentric Compression

Research on shear capacity of reinforced block short-leg masonry shear wall

Analytical modeling of masonry load-bearing walls

Experimental Study on the Seismic Behavior of a Frame-Supported Reinforced Masonry Short-Limb Shear Wall Structure

Experimental and Finite Element Analytical Investigation of Seismic Behavior of Full-Scale Masonry Infilled RC Frames

Lateral Load-Carrying Capacity of Continuous Masonry Wall Supported on Rc Frame

Experimental and Numerical Study on the Seismic Performance of Prefabricated Reinforced Masonry Shear Walls

Study on in-plane seismic performance of solid masonry-infilled RC frames

Research on reinforced block short-leg masonry shear wall

An Inquiry into Calculation Approaches of Bending Strength about Composite Shear Wall Slab

The Effects of Applied Axial Stress on Lateral Bearing-Load Capacity for Fully Grouted Reinforced Concrete Masonry Shear Walls

Experimental Research on Shear Performance of Reinforced Block Short-Leg Masonry Shear Wall

ANALYSIS ON MECHANICAL PERFORMANCE OF STEEL FRAME INFILLED WITH MASONRY PANEL

Seismic analysis of buckling-restrained braced steel frames infilled with masonry walls

Study on cooperation mechanism of hybrid masonry structure with RC framing under the action of vertical force

Numerical model and simplified formula of axial force-moment capacity of composite shear wall with double steel plates and infill concrete

In-Plane Cyclic Response of Reinforced Concrete Masonry Shear Wall with Large Cross-Section Core Columns

In-Plane Strengthening Effect of Prefabricated Concrete Walls on Masonry Structures: Shaking Table Test