Abstract:The 50 m box girders in the tidal flat section of unnavigable channel bridge in Hangzhou Bay Bridge adopt the approach of trolley on the under bridge to transport and erect the girder. Based on the actual working and load conditions, a precise 3D solid FEM simulation model is established by taking account of the space effects of prestressing force, applying equivalent node force and taking reasonable consideration of support details, etc. The values for concrete characteristics are determined according to current specifications for the design of highway bridge. The load is calculated with the consideration of the worst factors. The bottom of the support is simulated as rigid element. Modulus of elasticity for girder contact layer will not appear tensile stress when rotations and deformations occur at girder end. Element mesh should be as subdivided as possible when the structure is discretized. Owing to the relative complexity of the stress at girder end, thicker than span intermediate element mesh is adopted for girder end. The integral deformation and the space stress distribution of weight-bearing box girder are calculated. Results indicate that the deformation is relatively small and the maximum deflection is within the reversed arch because the load is quite close to the support. The maximum main tensile stress of the support section occurs at the side of bottom plank surface, which exceeds concrete cracking strength. Consequently, concrete in this area should be treated and stiffened so as to avoid it from cracking. When the maximum main compressive stress occurs near the stabilizer of girder-erecting machine, its value is less than the compressive strength of concrete.

Structural Optimum Design of the Second System of Orth otropic Steel Bridge

An analytical method and its application for large-section PC box girder bridges

Structural design and analysis of a large span partially single-sided cable-stayed pedestrian bridge

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Case Study on Stability Performance of Asymmetric Steel Arch Bridge with Inclined Arch Ribs

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Mechanical Behavior of Box Girder Bridge with Partial Corrugated Steel Webs

Optimal Design of Crossbeam Stiffness Factor in Bridge Towers Using a Reliability-Based Approach

Optimal Bracing System Design for Funicular Twin Arches Against Out-of-plane Buckling

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Nonlinear Optimization of Orthotropic Steel Deck System Based on Response Surface Methodology

Static and Dynamic Behavior of Continuous Box Girder Bridge and Its Experimental Investigation

Fatigue Performance Evaluation for an Orthotropic Steel Bridge Deck Based on Field Hotspot Stress Measurements

Analysis for Stress Characteristics and Structural Parameters Optimization in Orthotropic Steel Box Girders based on Fatigue Performance

Optimum Design of Large Span Concrete Filled Steel Tubular Arch Bridge Based on Static, Stability and Modal Analysis

Optimal design of steel buckling-restrained braces considering stiffness and strength requirements

Mechanical Performance and Design Optimization of Rib-Stiffened Super-Wide Bridge Deck with Twin Box Girders in Concrete

Dynamic Analysis and Design Parameter Optimization for Abnormal-Shaped Pedestrian Bridge with Steel Box Girder

Experimental study on stability of orthotropic steel box girder of self-anchored suspension cable-stayed bridge

Optimization of Mechanical Behavior of Steel and Concrete Continuous Composite Truss Girder Bridge

Principles of Designing Asphalt Pavement for Orthotropic Steel Bridge Decks