Abstract:International Journal of Structural Stability and Dynamics, Ahead of Print. Given the increasing use of high-strength steels in building constructions, the stability design of high-strength steel beams has become a crucial consideration. However, the current standards of various countries are based on analyses and fittings derived from conventional steel, rendering them unsuitable for high-strength steel. Moreover, existing research indicates that these standards underestimate the ultimate load-bearing capacity of high-strength steel beams. A finite element model was established to investigate lateral torsional buckling in high-strength steel beams. The obtained results were then compared with test results from experiments conducted on Q460GJ and Q690 steel beams. The reliability and accuracy of the established finite element model were validated. Through parametric studies, the impact of depth-to-width ratio, boundary condition, and steel grade on the stability coefficient was evaluated. It was observed that at the same non-dimensional slenderness, an increase in the depth-to-width ratio or a reduction in support constraints led to a decrease in the stability coefficient. It should be noted that the steel grade had little effect on the stability coefficient. Comparisons with the current steel structure design codes, such as EN1993-1-1, GB50017-2017, JGJ/T483-2020, and ANSI/AISC360-22 revealed an underestimation of the stability coefficient for clamped high-strength steel beams under uniformly distributed loads. Based on finite element simulations, stability coefficients for high-strength Q460, Q690, and Q960 clamped beams were determined. Similar to the stability coefficient proposed in GB50017-2017 for the lateral buckling stability design of steel beams, a lateral buckling stability coefficient for high-strength steel clamped beams subjected to uniformly distributed loads was proposed.

Stability of full-scale orthotropic steel plates under axial and biased loading: Experimental and numerical studies

Case Study on Stability Performance of Asymmetric Steel Arch Bridge with Inclined Arch Ribs

Experimental Investigation into Flexural Buckling of Double-Limb Built-Up Plate Members under Compression

Experimental and numerical study on stability behavior of reticulated shell composed of plate members

Elastic stability of plate simply supported on four sides subjected to combined bending shear and patch loading

New Advances In Theory Of Stability Of Steel Structures

Parametric Study of In-Plane Ultimate Bearing Capacity of CFST Truss Rib Arch Bridge

Experimental study on stability of orthotropic steel box girder of self-anchored suspension cable-stayed bridge

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Numerical Study and Design Method for Lateral Torsional Buckling of High-Strength Steel Beams

Theoretical and experimental studies of in-plane stability design of circular arches subjected to axial force and moment

Experimental and numerical investigation on patch loading capacity of longitudinally stiffened hybrid titanium-clad bimetallic steel plate girder

Mechanical Analysis of the Sandwich Plates Method for Strengthening Fatigue Cracks in Orthotropic Steel Bridge Decks

Buckling analysis and experimental study of simply-supported single-corrugation steel plates subjected to compression

Experimental Study and Numerical Analysis on Heavy-Duty Cast Steel Universal Hinged Supports for Large Span Structures

Experimental and Analytical Study on Local Buckling Behavior of High Strength Steel Welded I-Section Beams

Experimental Study On The Interactive Buckling Of Welded Section Steel Columns Under Axial Compression

Local buckling analysis of restrained orthotropic plates under generic in-plane loading

Buckling analysis of restrained orthotropic plates under combined in-plane shear and axial loads and its application to web local buckling

An Experimental Investigation on the Collapse Modes of Stiffened Plates Subjected to Combined Axial and Lateral Loads

Buckling of stiffened steel plates—a parametric study