Abstract:A simple and general Equivalent Dynamic Stiffness Mapping technique is proposed for identifying the parameters or the mathematical model of a nonlinear structural element with steady-state primary harmonic frequency response functions (FRFs). The Equivalent Dynamic Stiffness is defined as the complex ratio between the internal force and the displacement response of unknown element. Obtained with the test data of responses׳ frequencies and amplitudes, the real and imaginary part of Equivalent Dynamic Stiffness are plotted as discrete points in a three dimensional space over the displacement amplitude and the frequency, which are called the real and the imaginary Equivalent Dynamic Stiffness map, respectively. These points will form a repeatable surface as the Equivalent Dynamic stiffness is only a function of the corresponding data as derived in the paper. The mathematical model of the unknown element can then be obtained by surface-fitting these points with special functions selected by priori knowledge of the nonlinear type or with ordinary polynomials if the type of nonlinearity is not pre-known. An important merit of this technique is its capability of dealing with strong nonlinearities owning complicated frequency response behaviors such as jumps and breaks in resonance curves. In addition, this technique could also greatly simplify the test procedure. Besides there is no need to pre-identify the underlying linear parameters, the method uses the measured data of excitation forces and responses without requiring a strict control of the excitation force during the test. The proposed technique is demonstrated and validated with four classical single-degree-of-freedom (SDOF) numerical examples and one experimental example. An application of this technique for identification of nonlinearity from multiple-degree-of-freedom (MDOF) systems is also illustrated.

Stiffness Identification of Frame Structures under Simple Harmonic Excitation

Identification method for tensile force in hanger of arch bridges with damper and its application

Nonstationary Seismic Responses of Structure with Nonlinear Stiffness Subject to Modulated Kanai–Tajimi Excitation

Simulation and Experiment Study on System Identifications of Elastically Jointed Structures

Equivalent Dynamic Stiffness Mapping Technique for Identifying Nonlinear Structural Elements from Frequency Response Functions

Damping identification using weighted fitting of Frequency-response-function (WFF) method

Quasi-static testing based structural modal parameter estimation

APPLICATION OF STOCHASTIC SUBSPACE METHOD TO EXPERIMENTAL MODAL ANALYSIS OF SUSPENSION BRIDGES

Model-free Identification of Multiple Periodic Excitations and Detection of Structural Anomaly Using Noisy Response Measurements

Noncontact structural dynamic characteristics identification method and its test verification

Dynamic Stiffness Identification of Bolted Joints

Assessing Key Structural Stiffness of Existing Space Trusses Based on Optimized Simple Static Loadings

Experimental Study of Modal Parameter Identification in a Simulated Ambient-Excited Structure

A Model Identification Method of Vibrating Structures from Incomplete Modal Information

Modal Identification of Multi-Degree-of-freedom Structures Based on Intrinsic Chirp Component Decomposition Method

Research on the Simulation Method for Equivalent Stiffness of Bolted Connection Thin Plate Structures

A new technology to assess long-span bridge condition based on harmonic analysis via interpolated fast Fourier transform

Output-only Modal Identification Based on Hierarchical Hough Transform

Parameters Identification of Linear Structures Undergoing Ambient Excitation Using Mode Decomposition

Coherence Analysis Method for Dynamic Force Identification

Modal parameter identification for engineering structures based on HHT method