Abstract:ObjectivesThis paper characterizes how joint stiffness and damping parameters for a bolted cantilevered beam change with different number of bolts, different tightening torques on each, and with different levels of torsional excitations. Such characterization is unaddressed in the literature and is our modest contribution to the state-of-the-art. Another modest contribution is to propose and demonstrate the use of an alternative method of identifying joint characteristics using the harmonic balance method.MethodsA cantilevered beam was torsionally excited at its free end using a modal shaker and the relative displacements across the bolted connection were measured. Experiments were conducted in a temperature-controlled environment. Experiments for all configurations were repeated in a randomized order.ResultsSystem dynamics were observed to be strongly dependent on the level of excitation, tightening torques, and number of bolts at the interface. Parameters identified using the harmonic balance method were found to agree with those identified using the standard and established method of using hysteresis loops. Identified parameters were used to predict the dynamic behavior of another assembled system which had a similar bolted connection, thus validating the identification.ConclusionsExperimental setup and procedures described are simple and the methods of identification robust. Our results suggest that the harmonic balance method is a viable alternate method for joint parameter identification that is not very sensitive to signal processing and conditioning. Our methods and findings can guide other researchers and practitioners interested in the dynamics of assemblies with bolted joints.

Dynamic Stiffness Identification of Bolted Joints

Simulation and Experiment Study on System Identifications of Elastically Jointed Structures

Experimental Analysis of the Nonlinear Normal Static Stiffness of Bolted Joints

Identifying Joint Dynamics in Bolted Cantilevered Systems Under Varying Tightening Torques and Torsional Excitations

Research on the Simulation Method for Equivalent Stiffness of Bolted Connection Thin Plate Structures

A Joint Stiffness Identification Method Based on Finite Element Modeling and Frequency Response Functions

Dynamic Stiffness Identification of Adjustable Stiffness Joint Based on Decoupling and Linearization

A Four-Parameter Model for Nonlinear Stiffness of a Bolted Joint with Non-Gaussian Surfaces

An Integrated Joint Dynamics System for Elastically Jointed Structures

Variation in the nonlinear stiffness of bolted joints due to tangential hysteresis behavior

A Simplified Identification Method of Dynamic Stiffness for the Heavy-Load and Low-Speed Journal Bearings

Member stiffnesses and interface contact characteristics of bolted joints

Effect of preload distribution on dynamic characteristics of machine tool bolted joint structure

Structural mechanics analysis of bolt joint of rigid flexible coupling manipulator

Analytical Modeling of Axial Stiffness of Tensile Bolted Joints under Concentric External Load

The Influence of Bolt Joint Characteristics on Bending Stiffness of Rotor Joint Surface

Contact Stiffness Identification Method for Joint Surface and the Effect of Contact Stiffness on the Dynamic Response of the Cable Bracket

Damage Assessment Of Structural Joints Using System Identification Techniques

Measured and investigated nonlinear dynamics parameters on bolted flange joints of combined rotor

Bolt loosening detection in a jointed beam using empirical mode decomposition–based nonlinear system identification method

Dynamic Properties of Machine Bolted Joints Summary