Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. Wear of rolling elements can produce a huge impact on the mechanical properties of screw-nut joint, and is one of primary causes resulting in the accuracy degradation or even failure of kinematic pairs. Many mechanical models have been constructed to investigate the vibration performance of rolling elements. But the wear influence is considered scarcely because of the complicacy of loading status and wear process. In this study, a novel wear prediction model can be proposed for screw-nut joint to overcome the above difficulty. An ultimate stiffness model can be constructed on basis of the wear model. The influences of running distance, external forces, preload, and structural parameters on wear performance are researched. A dynamic model of screw-nut joint with varying stiffness is constructed to carry out a detailed study on its vibration performance, particularly taking into account the coupling effect between wear and vibration. The influences of wear on the axial stiffness and vibration characteristics are studied based on the proposed model. Moreover, the change rules of axial stiffness and dynamic response under variable preloads are researched. The results indicate that the choice of parameters can produce an appreciable impact on the wear rate. The wear can result in the losses of stiffness and critical displacement of screw-nut joint. Although increasing the preload can improve the stiffness and the critical displacement, it also aggravates the wear degree. When the relative displacement between nut and screw is greater than the critical displacement, the balls with preload and axial force in opposite directions will be out of action, and the monotonic property of stiffness will also change. Due to the monotonicity of stiffness is not consistent before and after the critical displacement point, the amplitude-frequency curve presents a jumping phenomenon.

A Four-Parameter Model for Nonlinear Stiffness of a Bolted Joint with Non-Gaussian Surfaces

Modeling and simulation of wear for alignment mechanism of large aircraft component

Modeling and nonlinear dynamic analysis of bolt joints considering fractal surfaces

A Review of Cross-Scale Theoretical Contact Models for Bolted Joints Interfaces

Experimental Analysis of the Nonlinear Normal Static Stiffness of Bolted Joints

A novel bolted joint model with stick-slip hysteresis properties considering pressure-dependent stiffness: Theoretical and experimental investigations

Multiscale modeling of friction hysteresis at bolted joint interfaces

Modeling for Hysteresis Contact Behavior of Bolted Joint Interfaces with Memory Effect Penalty Constitution

Variation in the nonlinear stiffness of bolted joints due to tangential hysteresis behavior

An Improved Model for Predicting Stiffness of Single-Lap Composites Bolted Joints Using Matlab/Simulink

An analytically improved four-stage model for single-lap torqued bolted joints accounting for preload relaxation

Nonlinear vibration analysis for bolted CFRC plates based on displacement-dependent surface spring-damping model of bolted joint

Nonlinear Dynamic Analysis for a Jeffcott Rotor Considering Varying Connection Stiffness of Bolted Joint

Interface Contact Pressure-Based Virtual Gradient Material Model for the Dynamic Analysis of the Bolted Joint in Machine Tools

Effects of the joint surface considering asperity interaction on the bolted joint performance in the bolt tightening process

Study on hysteresis and threaded fitting behavior of bolted joint with non-parallel bearing surface

Nonlinear vibration modeling and analysis of bolted thin plate based on non-uniformly distributed complex spring elements

Nonlinear dynamic analysis of bolted CFRC plates: Combined nonlinear effects

Progress in Theoretical Modelling of Macroscopic and Microscopic Dynamics of Bolted Joints in Complex Equipment

Model and nonlinear dynamic characteristics analysis of screw-nut joint considering coupling effect of wear and vibration

Equivalent Simulation of Mechanical Characteristics for Parametric Modeling of Bolted Joint Structures