Abstract:Fabrication of the composite polymer electrolyte films via solution casting approach. A detailed account of the poly(vinylidene difluoride‐co‐hexafluoropropylene) (PVDF‐HFP)/succinonitrile (SN)/lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) based solid polymer electrolytes (SPEs) of various compositions is reported. SN is incorporated as plasticizer, while LiTFSI is employed as the source of lithium ions. Fourier transfer infrared (FTIR) spectroscopy reveals the formation of polar and electroactive γ crystal phase by PVDF in pristine PVDF‐HFP and the prepared SPE films. FTIR further confirms the interaction between the host polymer and the salt and between the salt and the plasticizer. The interaction between the salt and plasticizer suggests that SN not only offers the plasticization effect but also facilitates salt dissociation. The ion conductivity increases with increasing salt content up to 20 wt% but beyond that concentration a decline in ion conductivity is observed, which could be attributed to the ion pair association or cluster formation due to the excess salt concentration that reduces the availability of free ions and ultimately leads to the reduction in ion conductivity. After including SN in the SPE formulation, electrochemical impedance spectroscopy reveals a substantial increase in room temperature ion conductivity of the SPE from ~1.08 × 10−5 S cm−1 for pristine SPE with 20 wt% salt to ~2.7 × 10−4 S cm−1 for plasticized SPE with 40 wt% SN and 20 wt% salt. This is attributed to the plasticizing effect of SN that enhances ion mobility through the matrix and to the increased charge carrier concentration (SN facilities salt dissociation). The fabricated SPEs exhibit a significant enhancement in ion conductivity with increasing temperature and the maximum ion conductivity of 1.1 × 10−3 S cm−1 is attained at 393 K by plasticized SPE with 40 wt% SN content. The ion conductivity of all the prepared SPEs follows the temperature dependent Arrhenius behavior, suggesting the thermally activated ion hopping mechanism of ionic conduction. Further, the plasticized SPEs display near unity ion transference number indicating the predominance of the ionic mode of conduction. The dielectric and electric modulus analysis reveal a faster relaxation phenomenon and hence higher ion conductivity of the prepared SPEs with increasing salt and plasticizer content.

The Effect of Solid Solution of Inorganic Saltson the Conductivity of Solid Polymer Electrolytes

Studies on the Ion States and Ion Transport Mechanism of Solid Polymer Electrolytes

The effects of salt concentration on ion state and conductivity in comb cross-linked polymer electrolytes

Promoting Ion and Heat Transfer of Solid Polymer Electrolytes by Tuning Polymer Chain Length and Salt Concentration

Imidazole containing solid polymer electrolyte for lithium ion conduction and the effects of two lithium salts

Effects of Components in Solvent-Enhanced PVDF-HFP-Based Polymer Electrolyte on Its Electrochemical Performance

Cation effect on ionic liquid-involved polymer electrolyte for solid-state lithium metal batteries

Effect of succinonitrile on the structural, ion conductivity, and dielectric properties of PVDF‐HFP based solid polymer electrolytes

Study on the Ionic Conduction of Solid Nanocomposite Polymer Electrolytes

Tailoring Li+ Local Coordination Environment of Solid Polymer Electrolytes to Boom Ionic Conductivity

Salt effects on the mechanical properties of ionic conductive polymer: a molecular dynamics study

Study on ionic conductivity, dielectric and electrochemical properties of solid polymer electrolyte for battery applications

Synergistic Combination of Ether-Linkage and Polymer-in-Salt for Electrolytes with Facile Li + Conducting and High Stability in Solid-State Lithium Batteries

Sulfur-containing Soft Lewis Base Polymers for Improved Lithium-ion Conductivity under Polymer-in-salt Conditions

A comparative study on the effects of salt and filler on transport and structural properties of organic–inorganic hybrid electrolytes

High Ionic Conductivity of Composite Solid Polymer Electrolyte Via in Situ Synthesis of Monodispersed SiO2 Nanospheres in Poly(ethylene Oxide).

Sodium-ion-conducting solid polymer electrolyte: temperature-dependent ionic parameters and solid-state polymer battery fabrication

A Rational Design of Solid Polymer Electrolyte with High Salt Concentration for Lithium Battery

Effects of lithium salts on PEO-based solid polymer electrolytes and their all-solid-state lithium-ion batteries

Electrochemical Properties of the Solid Polymer Electrolyte PEO20–LiSO3CF3–Urea1.5

Solid Polymer Electrolytes Comprising Camphor-Derived Chiral Salts for Solid-State Batteries