Abstract:Fabrication of the composite polymer electrolyte films via solution casting approach. A detailed account of the poly(vinylidene difluoride‐co‐hexafluoropropylene) (PVDF‐HFP)/succinonitrile (SN)/lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) based solid polymer electrolytes (SPEs) of various compositions is reported. SN is incorporated as plasticizer, while LiTFSI is employed as the source of lithium ions. Fourier transfer infrared (FTIR) spectroscopy reveals the formation of polar and electroactive γ crystal phase by PVDF in pristine PVDF‐HFP and the prepared SPE films. FTIR further confirms the interaction between the host polymer and the salt and between the salt and the plasticizer. The interaction between the salt and plasticizer suggests that SN not only offers the plasticization effect but also facilitates salt dissociation. The ion conductivity increases with increasing salt content up to 20 wt% but beyond that concentration a decline in ion conductivity is observed, which could be attributed to the ion pair association or cluster formation due to the excess salt concentration that reduces the availability of free ions and ultimately leads to the reduction in ion conductivity. After including SN in the SPE formulation, electrochemical impedance spectroscopy reveals a substantial increase in room temperature ion conductivity of the SPE from ~1.08 × 10−5 S cm−1 for pristine SPE with 20 wt% salt to ~2.7 × 10−4 S cm−1 for plasticized SPE with 40 wt% SN and 20 wt% salt. This is attributed to the plasticizing effect of SN that enhances ion mobility through the matrix and to the increased charge carrier concentration (SN facilities salt dissociation). The fabricated SPEs exhibit a significant enhancement in ion conductivity with increasing temperature and the maximum ion conductivity of 1.1 × 10−3 S cm−1 is attained at 393 K by plasticized SPE with 40 wt% SN content. The ion conductivity of all the prepared SPEs follows the temperature dependent Arrhenius behavior, suggesting the thermally activated ion hopping mechanism of ionic conduction. Further, the plasticized SPEs display near unity ion transference number indicating the predominance of the ionic mode of conduction. The dielectric and electric modulus analysis reveal a faster relaxation phenomenon and hence higher ion conductivity of the prepared SPEs with increasing salt and plasticizer content.

The effects of salt concentration on ion state and conductivity in comb cross-linked polymer electrolytes

Studies on the Ion States and Ion Transport Mechanism of Solid Polymer Electrolytes

The Effect of Solid Solution of Inorganic Saltson the Conductivity of Solid Polymer Electrolytes

Ion Conduction in the Comb-Branched Polyether Electrolytes with Controlled Network Structures.

Promoting Ion and Heat Transfer of Solid Polymer Electrolytes by Tuning Polymer Chain Length and Salt Concentration

Optimizing conductivity and cationic transport in crosslinked solid polymer electrolytes

Effect of succinonitrile on the structural, ion conductivity, and dielectric properties of PVDF‐HFP based solid polymer electrolytes

Simultaneous Improvement of Ionic Conductivity and Mechanical Strength in Block Copolymer Electrolytes with Double Conductive Nanophases.

Morphology and ionic conductivity of solid polymer electrolytes based on polyurethanes with various topological structures

Synergistic effects of salt concentration and polymer blend composition on the crystal phases, dielectric relaxation, and ion conduction in PVDF/PEO/LiCF3SO3 solid polymer electrolytes

Salt effects on the mechanical properties of ionic conductive polymer: a molecular dynamics study

Tailoring Li+ Local Coordination Environment of Solid Polymer Electrolytes to Boom Ionic Conductivity

Improving Ion Conductivity in Polymer Blend Electrolytes by Tuning Microdynamics and Interfaces

Unprecedented Impact of Main Chain on Comb Polymer Electrolytes Performances

Solid polymer electrolytes under nanoscale confinement: a molecular dynamics simulation

Research progress of polymer composite system in solid electrolyte

Advanced Crosslinked Solid Polymer Electrolytes: Molecular Architecture, Strategies, and Future Perspectives

Understanding Ion Distribution and Diffusion in Solid Polymer Electrolytes

Synthesis and Characterization of Novel Crosslinked Polyurethane–acrylate Electrolyte

A Healable Quasi‐Solid Polymer Electrolyte with Balanced Toughness and Ionic Conductivity

Enabling Polymeric Ionic Liquid Electrolytes with High Ambient Ionic Conductivity by Polymer Chain Regulation