Abstract:Solid polymer electrolytes (SPEs) have attracted extensive attention by virtue of lightweight and flexible processability for solid-state lithium metal batteries (LMBs) with high energy density and intrinsic safety. However, the SPEs suffer from the trade-off effect between ionic conductivity and mechanical strength. Herein, we report an ionic solid-like conductor with high Li + conductivity and good thermal stability as the conductive phase of polymer electrolytes for advanced LMBs. Using poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) as the polymer matrix, the ionic solid-like conductor can be regarded as a solid plasticizer due to its advantages of non-fluidity and non-leakage. It increases the amorphous region and the dissociation degree of lithium salts in SPEs, while minimizing the loss of mechanical properties. As a result, the Li + conductivity of SPEs incorporating the ionic solid-like conductor is enhanced by four orders of magnitude compared to the blank PVDF-HFP-based electrolyte. The optimized SPE membranes can be processed as thin as 50 μm with a high Young's modulus of 16.8 MPa, therefore ensuring stable long-term cycling of solid-state LMBs. The Li/Li symmetric cells stably cycled for more than 750 h without short circuits, and the LiFePO 4 /Li solid-state batteries demonstrate excellent electrochemical performance over 350 cycles with a capacity retention of 82.5%. This work provides a new strategy for designing ionic solid-like conductors as solid plasticizers for high-performance polymer electrolytes.

Solid Polymer Electrolytes Comprising Camphor-Derived Chiral Salts for Solid-State Batteries

In-situ Polymerized Electrolyte Modified with Oligomeric Cyclotetrasiloxane for All-Solid-state Lithium Metal Batteries

PEO-LITFSI-SiO<sub>2</sub>-SN System Promotes the Application of Polymer Electrolytes in All-Solid-State Lithium-ion Batteries

Anions with a Dipole: Toward High Transport Numbers in Solid Polymer Electrolytes

Dielectric polymer based electrolytes for high-performance all-solid-state lithium metal batteries

Design Strategies for Polymer Electrolytes with Ether and Carbonate Groups for Solid-State Lithium Metal Batteries

Solid Polymer Electrolyte Comprised of Lithium Salt/ether Functionalized Ammonium-Based Polymeric Ionic Liquid with Bis(fluorosulfonyl)imide

Single Li ion conducting solid-state polymer electrolytes based on carbon quantum dots for Li-metal batteries

Poly(β‐amino ester) based solid polymer electrolytes for lithium‐ion batteries

Synergistic Combination of Ether-Linkage and Polymer-in-Salt for Electrolytes with Facile Li + Conducting and High Stability in Solid-State Lithium Batteries

Novel Li[(Cf3so2)(N-C4f9so2)N]-Based Polymer Electrolytes for Solid-State Lithium Batteries with Superior Electrochemical Performance

Phenylboronic Acid Functionalized Calix[4]pyrrole‐based Solid‐State Supramolecular Electrolyte

Lithium Bis(fluorosulfonyl)imide/Poly(ethylene oxide) Polymer Electrolyte for All Solid-State Li-S Cell.

Robust thiol-branched all-solid-state polymer electrolyte featuring high ionic conductivity for lithium-metal batteries

Lithium Salt Catalyzed Ring-Opening Polymerized Solid-State Electrolyte with Comparable Ionic Conductivity and Better Interface Compatibility for Li-Ion Batteries

Asymmetric Trihalogenated Aromatic Lithium Salt Induced Lithium Halide Rich Interface for Stable Cycling of All-Solid-State Lithium Batteries

An Sodium Bis(trifluoromethanesulfonyl)imide-based Polymer Electrolyte for Solid-State Sodium Batteries

Ionic solid-like conductor-assisted polymer electrolytes for solid-state lithium metal batteries

Salt-with-Salt, a Novel Strategy to Design the Flexible Solid Electrolyte Membrane for Highly Safe Lithium Metal Batteries

Advanced High-Voltage Electrolyte Design Using Poly(ethylene oxide) and High-Concentration Ionic Liquids for All-Solid-State Lithium Metal Batteries

Single Lithium-Ion Conducting Solid Polymer Electrolyte with Superior Electrochemical Stability and Interfacial Compatibility for Solid-State Lithium Metal Batteries