Abstract:A novel microfluidic picoliter-scale sample introduction approach was developed by combining the spontaneous injection approach with a capillary electrophoresis (CE) system based on a short capillary and slotted-vial array. A droplet splitting phenomenon at the capillary inlet end during the spontaneous sample introduction process was observed for the first time. On the basis of this phenomenon, a translational spontaneous injection approach was established to reduce sample injection volumes to the sub-100 pL range. A versatile high-speed capillary electrophoresis (HSCE) system was built on the basis of this sample injection approach with separation performance comparable to or even better than those reported in microfluidic chip-based CE systems. The HSCE system was composed of a short fused-silica capillary and an automated sample introduction system with slotted sample and buffer reservoirs and a computer-programmed translational stage. The translational spontaneous sample injection was performed by linearly moving the stage, allowing the capillary inlet first to enter the sample solution and then removing it. A droplet was left at the tip end and spontaneously drawn into the capillary by surface tension effect to achieve sample injection. The stage was continuously moved to allow the capillary inlet to be immersed into the buffer solution, and CE separation was performed by applying a high voltage between the buffer and waste reservoirs. With the use of the novel system, high-speed and efficient capillary zone electrophoresis (CZE) separation of a mixture of five fluorescein isothiocyanate (FITC) labeled amino acids was achieved within 5.4 s in a short capillary with a separation length of 15 mm, reaching separation efficiencies up to 0.40 microm plate height. Outstanding peak height precisions ranging from 1.2% to 3.7% RSD were achieved in 51 consecutive separations. By extension of the separation length to 50 mm, both high-speed and high-resolution CZE separation of eight FITC-labeled amino acids could be obtained in less than 21 s with theoretical plates ranging from 163,000 to 251,000 (corresponding to 0.31-0.20 microm plate heights). The present HSCE system also allowed fast chiral separations of FITC-labeled amino acids under micellar electrokinetic chromatography (MEKC) mode within 6.5 s.

Micellar Electrokinetic Chromatographic Separation of FITC-derived Amino Acids by Using a Microfluidic Chip

Study on the Separation of Amino Acids in Modified Poly(dimethylsiloxane) Microchips.

Chiral Separation of FITC-labeled Amino Acids with Gel Electrochromatography Using a Polydimethylsiloxane Microfluidic Device.

Microfabrication of Integrated Capillary Electrophoresis Chips and On-chip Sample Injection and Separation

A microfluidic fluorous solid-phase extraction chip for purification of amino acids.

Fabrication of Micro/Nanofluidic Chip on Glass Substrate and Its Application for Electrokinetic Concentration of Proteins

An Automated Electrokinetic Continuous Sample Introduction System for Microfluidic Chip-Based Capillary Electrophoresis

A High-Throughput Continuous Sample Introduction Interface for Microfluidic Chip-Based Capillary Electrophoresis Systems.

Effect Of Surfactants On Detection And Separation Of 4-Cl-7-Nitrobenzofurazan Derived Amino-Acids By Chip-Based Capillary Electrophoresis

Thermo-swicthable electrokinetic ion-enrichment, elution and separation based on a poly (n-isopropylacrylamide) hydrogel plug prepared inside a glass microchannel

A Chip-based Capillary Electrophoresis System for High-efficiency Bioanalysis

Microfluidic Picoliter-Scale Translational Spontaneous Sample Introduction for High-Speed Capillary Electrophoresis

Fabrication of a polystyrene microfluidic chip coupled to electrospray ionization mass spectrometry for protein analysis.

Sequential injection sample introduction microfluidic-chip based capillary electrophoresis system

Automated high-speed CE system for multiple samples

On-chip solid phase extraction coupled with electrophoresis using modified magnetic microspheres as stationary phase

Convenient Enantioseparation by Monolithic Imprinted Capillary Clamped in a Chip with Electrochemical Detection

High-speed, Whole-Column Fluorescence Imaging Detection for Isoelectric Focusing on a Microchip Using an Organic Light Emitting Diode As Light Source.

Microfluidic Analysis System Based On Capillary Electrophoresis Chip

Capillary Electrophoresis Microchip Coupled with On-Line Chemiluminescence Detection

Comprehensive Two‐dimensional Separations Based on Capillary High‐performance Liquid Chromatography and Microchip Electrophoresis