Abstract:A novel microfluidic picoliter-scale sample introduction approach was developed by combining the spontaneous injection approach with a capillary electrophoresis (CE) system based on a short capillary and slotted-vial array. A droplet splitting phenomenon at the capillary inlet end during the spontaneous sample introduction process was observed for the first time. On the basis of this phenomenon, a translational spontaneous injection approach was established to reduce sample injection volumes to the sub-100 pL range. A versatile high-speed capillary electrophoresis (HSCE) system was built on the basis of this sample injection approach with separation performance comparable to or even better than those reported in microfluidic chip-based CE systems. The HSCE system was composed of a short fused-silica capillary and an automated sample introduction system with slotted sample and buffer reservoirs and a computer-programmed translational stage. The translational spontaneous sample injection was performed by linearly moving the stage, allowing the capillary inlet first to enter the sample solution and then removing it. A droplet was left at the tip end and spontaneously drawn into the capillary by surface tension effect to achieve sample injection. The stage was continuously moved to allow the capillary inlet to be immersed into the buffer solution, and CE separation was performed by applying a high voltage between the buffer and waste reservoirs. With the use of the novel system, high-speed and efficient capillary zone electrophoresis (CZE) separation of a mixture of five fluorescein isothiocyanate (FITC) labeled amino acids was achieved within 5.4 s in a short capillary with a separation length of 15 mm, reaching separation efficiencies up to 0.40 microm plate height. Outstanding peak height precisions ranging from 1.2% to 3.7% RSD were achieved in 51 consecutive separations. By extension of the separation length to 50 mm, both high-speed and high-resolution CZE separation of eight FITC-labeled amino acids could be obtained in less than 21 s with theoretical plates ranging from 163,000 to 251,000 (corresponding to 0.31-0.20 microm plate heights). The present HSCE system also allowed fast chiral separations of FITC-labeled amino acids under micellar electrokinetic chromatography (MEKC) mode within 6.5 s.

Thermo-swicthable electrokinetic ion-enrichment, elution and separation based on a poly (n-isopropylacrylamide) hydrogel plug prepared inside a glass microchannel

Thermoswitchable Electrokinetic Ion-Enrichment/Elution Based on a Poly(N-isopropylacrylamide) Hydrogel Plug in a Microchannel

Elimination of suction effect in interfacing microchip electrophoresis with inductively coupled plasma mass spectrometry using porous monolithic plugs.

Thermo-sensitive ionic microgels via post quaternization cross-linking: fabrication, property, and potential application

Thermosensitive ionic microgels via surfactant-free emulsion copolymerization and in situ quaternization cross-linking.

Fabrication of Micro/Nanofluidic Chip on Glass Substrate and Its Application for Electrokinetic Concentration of Proteins

Preparation of thermoswitchable micro capillary force valves inside polydimethylsiloxane microfluidic channels

Modification of Amorphous Poly(ethylene Terephthalate) Surface by UV Light and Plasma for Fabrication of an Electrophoresis Chip with an Integrated Gold Microelectrode

On-chip integrated multi-thermo-actuated microvalves of poly(N-isopropylacrylamide) for microflow injection analysis

Chiral Separation of FITC-labeled Amino Acids with Gel Electrochromatography Using a Polydimethylsiloxane Microfluidic Device.

Poly(N-isopropylacrylamide) Interfaces with Dissimilar Thermo-responsive Behavior for Controlling Ion Permeation and Immobilization

Electroosmotic Flow-Switchable Poly (dimethylsiloxane) Microfluidic Channel Modified with Cysteine Based on Gold Nanoparticles

Extraction of electrokinetically separated analytes with on-demand encapsulation

On-chip solid phase extraction coupled with electrophoresis using modified magnetic microspheres as stationary phase

Property of Ionic Liquid in Electrophoresis and Its Application in Chiral Separation on Microchips

Microfabrication of Integrated Capillary Electrophoresis Chips and On-chip Sample Injection and Separation

Aqueous chromatography utilizing pH-/temperature-responsive polymer stationary phases to separate ionic bioactive compounds

Angstrom‐scale channels with versatile ion‐membrane interactions enabling precise ion separation via electrodialysis

Covalent modified hydrophilic polymer brushes onto poly(dimethylsiloxane) microchannel surface for electrophoresis separation of amino acids

Microfluidic Picoliter-Scale Translational Spontaneous Sample Introduction for High-Speed Capillary Electrophoresis

Electrokinetic concentration enrichment within a microfluidic device using a hydrogel microplug