Research on thin and broadband magnetic absorbing materials with embedded frequency selective surfaces

Ge Li,Yi Zhu,Mengchao Guo,Dongming Tang,Baoshan Zhang,Yi Yang

DOI: https://doi.org/10.13232/j.cnki.jnju.2019.03.014

2019-01-01

Abstract:Microwave absorption properties of thin composites containing frequency selective surfaces(FSS)embedded in magnetic absorbing material(MAM)are presented in this paper.The FSS is composed of a regular array of square loop elements and a low-loss dielectric flat as the substrate.The top and bottom magnetic absorbing materials are carbonyl iron composites with different electromagnetic parameters.It is difficult to obtain good microwave absorp-tion properties only using the conventional magnetic absorber without FSS embedded in a broadband frequency range.The thickness of the magnetic absorber will be too large,and subsequently the surface density of the absorber will be greatly increased,which will limit its application regions.Introducing FSS can enhance the microwave absorp-tion ability of magnetic composites,especially in the low frequency range,and hence broaden the absorption band as well as effectively reduce the thickness of the absorber.Under the condition of surface impedance matching,the ohmic dissipation originating from metal elements of FSS and the magnetic loss originating from the bottom layer are the main mechanism to absorb electromagnetic energy.In order to investigate the microwave absorption proper-ties of the composite structure,we built the model using the electromagnetic simulation software HFSS 15.0,and then continuously optimized the structural parameters based on the simulation results.The final simulation results show that the composite microwave absorber with the thickness of 2 mm has an operating bandwidth with the reflec-tivity below -10 dB in the frequency range of 3.4 G~9 GHz and -8 dB in the frequency range of 9 G~18 GHz. The absorber obtains -5.5 dB reflectivity at 2 GHz.Compared with the absorber without FSS inserted under the same condition,though the higher peak absorption could be achieved using the absorber without FSS,the microwave absorption properties become worse and worse,and hardly meet the requirement of broadband absorption.The composite microwave absorber with FSS inserted,which has a broad absorption band and excellent low-frequency absorption characteristics,has a wide application prospect.