Abstract:Frequency selective surface (FSS) has extensively been investigated over the past decades. The most famous applications of FSS are used for antennas radome and controlling radar cross section (RCS). FSS radome could reflect the signal out of the band so that the RCS could be reduced by shaping. However, with the development of radar detection technology, the scattering out of the band becomes non-negligible. In order to improve the problem, the FSS rasorber was proposed. It is the combination of the absorber and the radome. In this paper, a wideband transmission FSS rasorber is designed, acting as a stealthy radome to reduce the scattering out of band of the antenna system. The rasorber consists of an absorption layer (LayerA) and a transmission layer (LayerT). The LayerA, which use a resistor-loaded in Jerusalem cross element with non-touching centre, provides stable losses out of band and minimizes losses in the band. The LayerT use as the ground plane of an absorber based on the absorption layer within the total reflection band and providing a transmission window in the band. In order to obtain a wideband transmission, two series chokes are inserted in each leg in the LayerA and the LayerT adopts a second-order resonator. Moreover, the elements are packed densely owing to a skewed grid in the LayerA and the miniaturized non-resonant element in the LayerT. Superdense arrays cause a more stable performance of the rasorber, especially the delay of grating lobes onset. The composite structure is thoroughly analyzed by means of the full-wave numerical simulation. The simulation shows that the -1 dB transmission window is 5.7 ~ 6.7 GHz, and the -10dB reflection band is 2.2 ~ 5.1 GHz. The design would be widely used in broadband antenna system.

Realization of Thin and Broadband Magnetic Radar Absorption Materials with the Help of Resistor FSS

Broadening Bandwidth of the Composite Radar Absorption Material Involving A Frequency Selective Surface

Broad bandwidth of thin composite radar absorbing structures embedded with frequency selective surfaces

Design of a Light-Weight Magnetic Radar Absorber Embedded with Resistive FSS

Design of a Tunable Low-Frequency and Broadband Radar Absorber Based on Active Frequency Selective Surface

A THIN AND BROADBAND MICROWAVE ABSORBER BASED ON MAGNETIC SHEETS AND RESISTIVE FSS

Broadband Microwave Absorption Properties of Ultrathin Composites Containing Edge-Split Square-Loop FSS Embedded in Magnetic Sheets

Design of an Ultra-Thin Magnetic-Type Radar Absorber Embedded with FSS

Multi-characteristic Integrated Ultra-wideband Frequency Selective Rasorber

A Thin and Broadband Tunable Radar Absorber Using Active Frequency Selective Surface

Broadband Composite Radar Absorbing Structures with Resistive Frequency Selective Surface: Optimal Design, Manufacturing and Characterization

An ultrathin and broadband radar absorber using resistive FSS

Design of a Wideband Absorption Frequency Selective Rasorber Based on Double Lossy Layers

Broadband radar-absorbing performance of square-hole structure

A Broadband Radar Absorber Based on Perforated Magnetic Polymer Composites Embedded with Fss

Frequency Selective Rasorber with Broadband Transmission Window Using Characteristic Modes Analysis

A Wideband Transmission Frequency Selective Surface Rasorber

Design And Preparation Of A Radar-Absorbing Material Based On Metamaterial

Tapered Resistive Sheets and FSS Absorber Loading for the Wideband RCS Reduction of the Elliptic Surface at TM Polarization

Ultra-Broadband and Polarization-Insensitive Metamaterial Absorber Based on Frequency Selective Surface

A miniaturized frequency selective rasorber with high selectivity passband and wideband absorption properties