Abstract:Ternary extractive distillation (TED) is an effective and sustainable separation process for treating pharmaceutical wastewater containing ethyl acetate/isopropanol/water, corresponding to three binary azeotropes, to realize the recovery of ethyl acetate and isopropanol. Visual Basic software was used to optimize the extractive distillation process using a single solvent and mixed solvent in different proportions based on a sequential iterative optimization method, and the optimal mixture proportion (30% DMSO+70% EG) of the mixed solvent was determined. The economic and environmental performance of the extractive distillation process with a mixed solvent combined with partial thermal coupling technology was studied. The heat recovery within the separation process was further improved by the energy-efficient heat exchanger network synthesis (HENs) option. The economic and environmental performance of the mixed solvent extractive distillation process combined with heat pump technology was also explored. The results show that for the ternary extractive distillation process, the use of mixed solvent can significantly reduce energy consumption, which can lead to lower total annual cost (TAC) and CO2 emission. Compared with a conventional separation process with mixed solvent, the extractive distillation process combined with partial thermal coupling and heat pump technology further improves the economic and environmental performance. The TAC and CO2 emission of the mixed solvent separation process combined with partial thermal coupling technology were reduced by 12.183% and 19.869%, respectively. The TAC and CO2 emission of the mixed solvent separation process combined with heat pump distillation technology were reduced by 34.782% and 37.156%, respectively, which indicates the feasibility of using these two energy-saving processes for continuously updated cleaner production.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.iecr.0c02225?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.iecr.0c02225</a>.Capital and energy calculation formulas, binary interaction parameters for the NRTL model for the separation system, and optimization results: (Table S1) interaction parameters of the NRTL model, (Table S2) basis of economics and equipment sizing, (Figure S1) distillation optimization software based on sequential iteration method, (Table S3) optimal process parameters for extractive distillation process using DMSO, EG, and mixed solvent, and (Table S4) economic and energy consumption results of all processes (<a class="ext-link" href="/doi/suppl/10.1021/acs.iecr.0c02225/suppl_file/ie0c02225_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Simulation and Optimization of Acetic Acid Distillation Process Based on Aspen Plus

Energy-saving Technology in Steady-state Simulation of Ethylene Acetate Production Process Using Aspen Plus

A Study on Increasing Separation Efficiency of an Industrial, Compound Distillation Column

Exergy Analysis of Two Typical Pure Terephthalic Acid Process

Optimization and simulation of vinyl acetate process based on Aspen Plus

Design Optimization and Operating Pressure Effects in the Separation of Acetonitrile/methanol/water Mixture by Ternary Extractive Distillation

Energy-use Analysis and Optimization for DMF Recovery Technology

Thermodynamic Analysis, Simulation and Optimization on Energy Savings of Ideal Internal Thermally Coupled Distillation Columns

Optimization of energy-saving distillation system of absorption heat pump based on intermediate heat exchange

Optimization of Internal Thermally Coupled Distillation Columns of Nonideal Mixture

Thermodynamic analysis and azeotropic distillation simulation for acetic acid-water-butyl acetate system

Process optimization of an industrial acetic acid dehydration progress via heterogeneous azeotropic distillation

Economic, environmental, energy, exergy (4E) analysis and simulated annealing algorithm optimization of dividing-wall column-intensified heterogeneous azeotropic pressure-swing distillation process

Energy efficiency analysis and optimization of heat exchange network under the goal of "double carbon": a case for production process of isopropyl acetate

Sustainable design and multi-objective optimization of heat pump assisted extractive distillation process for separating a ternary mixture of methyl acetate, tetrahydrofuran and methanol

Economic and Energy-Saving Heat Pump Assisted Triple-Column Pressure-Swing Distillation for the Separation of Methanol/Ethyl Acetate/Methyl Via Thermodynamic Insights and Multi-Objective Optimization

Investigation of energy-efficient heat pump assisted heterogeneous azeotropic distillation for separating of acetonitrile/ethyl acetate/n-hexane mixture

Energy-Saving Exploration of Mixed Solvent Extractive Distillation Combined with Thermal Coupling or Heat Pump Technology for the Separation of an Azeotrope Containing Low-Carbon Alcohol

Design and 4E analysis of heat pump-assisted extractive distillation processes with preconcentration for recovering ethyl-acetate and ethanol from wastewater

Process simulation and optimization of separating aziridine

Thermodynamic efficiency enhancement of pressure-swing distillation process via heat integration and heat pump technology