Abstract:Vinyl acetate is one of the important chemical raw materials for the production of polyvinyl alcohol and polyvinyl acetate, and ethylene gas phase process is one of its mainstream production processes. In the industrial production of vinyl acetate, the kinetic equations needed for reactor design are usually obtained by experimental methods. In addition, it was found that the production of CO 2 increased significantly at the last stage of the reaction. This abnormal phenomenon is often explored and solved through experiments. The use of experimental and simulation methods to verify and assist each other can better solve the problems in practical application. Based on the existing experimental research, we try to use the method based on the combination of density functional theory and kinetic Monte Carlo to obtain the reaction kinetic equation and explore the reasons for the significant increase of CO 2 at the last stage of the reaction. By studying the effects of temperature, partial pressure of ethylene and oxygen on the formation rate of vinyl acetate and CO 2 , the kinetic equation of the main reaction is rVA = 58.4 exp( −8732RT)pC2H40.17pO20.15 . The kinetic equation of the side reaction of CO 2 formation is rCO2 = 8.43 × 10 3 exp( −28447RT)pC2H4−0.16pO20.61 . In addition, it was found that the significant increase of CO 2 at the last stage of the reaction was caused by the acceleration of the oxidation rate of acetic acid. Therefore, in the actual process design, it will be considered to reduce the feed amount of acetic acid at the last stage of the reaction, so as to reduce the formation of CO 2 . It is hoped that our research can provide some reference and guidance for the acquisition of reaction kinetic equations and the interpretation and solution of some abnormal phenomena in actual industrial production.

Optimization and simulation of vinyl acetate process based on Aspen Plus

Energy-saving Technology in Steady-state Simulation of Ethylene Acetate Production Process Using Aspen Plus

Energy-use Analysis and Optimization for DMF Recovery Technology

Modeling, Simulation and Optimization of a Whole Industrial Catalytic Naphtha Reforming Process on Aspen Plus Platform

Simulation and improvement of the separation process of synthesizing vinyl acetate by acetylene gas-phase method

Simulation and optimization of isopropanol production by acetone hydrogenation process

Energy efficiency analysis and optimization of heat exchange network under the goal of "double carbon": a case for production process of isopropyl acetate

Process Simulation, Thermodynamic and System Optimization for the Low-Carbon Alcohols Production Via Gasification of Second-Generation Biomass

Development and application of energy-saving process for methanol to olefins

Vinyl Chloride Distillation Process Simulation Optimization Evaluation: Optimization Based on NSGA-III Algorithm and Quantitative Risk Analysis

Process simulation and optimization of energy-saving and environment-friendly methanol distillation device

Energy Saving Opportunities in an Air Separation Process

Process optimization of an industrial acetic acid dehydration progress via heterogeneous azeotropic distillation

Kraft Lignin-Based Vanillin Production – Process Modification, Techno-Economic Evaluation, and Energy Analysis

Design and Optimization of a Process for the Production of Methyl Methacrylate Via Direct Methylation

Integration of Energy Saving and Emission Reduction of an Acetone-Benzol Dewaxing Device

A combination of DFT and kMC to solve two engineering problems in the production of vinyl acetate

Simulation and optimization of product separation process for a 520 kt/a methanol-to propylene (MTP) plant

Process Modeling and Exergy Analysis for a Typical VOC Thermal Conversion Plant

Analysis of Process Control Performance for an Industrial Demethanizer Based on Dynamic Simulation

Optimization of energy-saving distillation system of absorption heat pump based on intermediate heat exchange