Abstract:At present, initial alignment of land combat vehicles generally uses stationary alignment. In order to achieve better performance of alignment, vehicle must remain stationary during the alignment process; but during the alignment process, vehicle is inevitably subject to the impact of vibration disturbance by wind gust or engine idling, etc. Therefore, the impact of vibration disturbance on alignment performance must be considered during the actual stationary alignment. Although compared to Kalman filter alignment method (Including the two stages of coarse alignment and fine alignment) based on method modern control theory, alignment time of gyrocompass alignment method (Including the two stages of level alignment and azimuth alignment) based on classical control theory is longer; but its robustness of vibration disturbance is better. This was mainly due to that Kalman filter alignment method is based on the error model of SINS. So vibration disturbance is stronger, the worse is the accuracy of the error model, indirectly aimed at the poorer performance. In order to guarantee the alignment accuracy under the rocking base, and shorten the convergence time of alignment, a gyrocompass alignment method of SINS based on Kalman filtering pretreatment and dynamic gain adjustment is proposed. In this method, the output of Gyros and accelerometers are firstly pre-filtered using Kalman filtering, and then the initial alignment of SINS is done using gyrocompass alignment based dynamic gain adjustment. Among them, the high-frequency low-amplitude rocking interference of vehicle is filtered out through Kalman filter; the low-frequency high-amplitude rocking interference of vehicle is tracked through dynamic gain adjustment of compass alignment based on the alignment time and the degree of attitude change. Through vehicle test analysis of some ring laser SINS, it shows that under the same alignment accuracy, the alignment time of the gyrocompass alignment method proposed by this paper compared to the traditional gyrocompass alignment method based on piecewise variable gain is shorter; under the same alignment time, the alignment accuracy of the gyrocompass alignment method proposed by this paper compared to the Kalman filter alignment method is higher. So, under the conditions of rocking base, the alignment performance of the gyrocompass alignment method proposed by this paper compared to the traditional gyrocompass alignment method based on piecewise variable gain and Kalman filter alignment method is improved.

North-finder Based on Single-axis Platform with Dynamically Tuned Gyro and Its Error Analysis

A Temperature Drift Compensation Method Applied to Fiber Optic Gyroscope North-Seeking

Theory And Error Compensation Method Based On The Tilt Sensor Adopted In Dynamic Angle Measurement Of The Fiber Optic Gyroscope

A Novel Mems Gyro North Finder Design Based On The Rotation Modulation Technique

Gyrocompass Alignment Method Of Sins Based On Kalman Filtering Pretreatment And Dynamic Gain Adjustment On Rocking Base

Learning to Compensate for the Drift and Error of Gyroscope in Vehicle Localization

Experimental Analysis of the Dynamic North-Finding Method Based on a Fiber Optic Gyroscope

A rapid and low-cost north-finder design with error compensation

Modified Dynamic North-Finding Scheme With a Fiber Optic Gyroscope

Design of Miniaturized MEMS Gyro North Finder Based on Two-Phase Axial Flux PMSM

Error Analyses for the Algorithms of the Static Fiber-optic Gyro North-finder Schemes

Fiber optic gyroscope dynamic north-finder algorithm modeling and analysis based on Simulink

Accurate Calibration for Drift of Fiber Optic Gyroscope in Multi-Position North-Seeking Phase

A Segmented Cross-Correlation Algorithm for Dynamic North Finding Using Fiber Optic Gyroscopes

Analysis of Dynamic North Finding Based on Multiple Low-Precision MIMUs

Optimal Weighted Fusion based on Recursive Least Squares for Dynamic North-Finding of MIMU on a Tilting Base

Method to Suppress Bias Drift and Improve the Accuracy of North Finding with Fiber Optic Gyroscopes

Precision tilting platform used for static calibration of accelerometers

Study on directional logging attitude measurement with gyroscope

Enhanced multiposition method to suppress the north finding error caused by bias drift with fiber optic gyroscopes.

Method to suppress the north-seeking error by bias drift and angle random walk with fiber optic gyroscopes