Abstract:Introduction. Currently, the versatility and reliability of gyroscopic inclinometers (GI), more than accuracy, determine their configuration and design. Imperative conditions for versatility include a diameter of 42...44.5 mm and a combination of point and continuous survey modes. Reliability is primarily determined by the robustness of the main elements. The fundamental parameter is adaptability to the trajectory, in other words, equal accuracy in the operating range of zenith angles, which determines the choice of orientation of the angular velocity sensors (ARS) with incomplete (< 3) number of their axis. Presently, biaxial dynamically tuned gyroscopes (DNG) are widely used due to their dimension and accuracy criteria; however, their elastic suspension gradually degrades as a result of frequent sidetracking operations (from previously drilled ones) accompanied by high-intensity impacts. Aim . To develop an inexpensive versatile GI that maintains a balance between shock resistance and accuracy (com[1]parable to fiber-optic ARS) based on a single-axis vibrating ring gyroscope (VRG) with an induction-type resonator made using MEMS technology. Materials and methods . The method of multi-position compassing with a single uniaxial ARS was implemented by transition from simultaneous biaxial measurements to uniaxial measurements in five successive positions of the frame (through 90°) along the toolface angle. Experimental data on the drifts of the selected VRG allow statistical methods to be used to construct an Allan-variance plot to confirm that the proposed method does not increase the total compassing time compared to the basic one. The continuous mode of such a GI, studied by solving differential equations, requires holding the input axis of the ARS near the apsidal plane using the same rotating frame. Results. The obtained ratios confirm that the performance characteristics of a GI with a uniaxial ARS approximately correspond to the conventional biaxial scheme. These conclusions were also confirmed by the mathematical modeling of a survey of a typical oil and gas well. Conclusion . The described GI containing a single ARS with indirect stabilization of the input axis is the result of a consistent development of the approach to the use of incomplete information

Study on directional logging attitude measurement with gyroscope

A New Method to Eliminate the Misalignment Angle in Dynamic Goniometer Based on Fiber Optic Gyro

Theory And Error Compensation Method Based On The Tilt Sensor Adopted In Dynamic Angle Measurement Of The Fiber Optic Gyroscope

A Three-dimension High-Precision and Non-contact Dynamic Angular Displacement Measurement System based on Heterodyne Interference

Real-Time Orientation-Invariant Magnetic Localization and Sensor Calibration Based on Closed-Form Models

A Liquid-Surface-Based Three-Axis Inclination Sensor for Measurement of Stage Tilt Motions

A measuring system for well logging attitude and a method of sensor calibration

Dynamic Data Acquisition and Processing of Yawing Angle Based on Fiber-Optic Gyro Orientation

Study of Drill Measuring System Based on MEMS Accelerative and Magnetoresistive Sensor

A Long-Term Performance Enhancement Method for FOG-Based Measurement While Drilling

Versatile Gyroinclinometer Based on a Single Axis Angular Rate Sensor

Attitude Measurement and Error Compensation for Horizontal Directional Drilling

Integration micro-magnetic sensor and accelerometer microsystem for orienting application

Testing of a MEMS Dynamic Inclinometer Using the Stewart Platform

A Small Low-Cost Hybrid Orientation System and Its Error Analysis

Detection Methods of Earth's Rotation Rate with a MEMS Gyroscope

Cost-Effective Improvements of A Rotating Platform by Integration of A High-Accuracy Inclinometer and Encoders for Attitude Evaluation

A Novel Mems Gyro North Finder Design Based On The Rotation Modulation Technique

Accelerometer optimization based on real-time measurement of Hole Deviation INS with While-Drilling

On-site accuracy evaluation of laser tracking attitude measurement system

Magnetic field interference correction of high-precision geomagnetic directional technology