Abstract:As a specific force sensor, the tri-axis accelerometer is one of the core instruments in an inertial navigation system (INS). During navigation, its measurement error directly induces constant or alternating navigation errors of the same order of magnitude. Moreover, it also affects the estimation accuracy of gyro drift coefficients during the initial alignment and calibration, which will indirectly result in navigation errors accumulating over time. Calibration can effectively improve measurement accuracy of the accelerometer. Device-level calibration can identify all of the parameters in the error model, and the system-level calibration can accurately estimate part of these parameters. Combining the advantages of both the methods and making full use of the precise angulation of the space-stabilized platform, this paper proposes a three-stage accelerometer self-calibration technique that can be implemented directly in the space-stable INS. The device-level calibration is divided into two steps considering the large amount of parameters. The first step is coarse calibration, which identifies parameters except for the nonlinear terms, and the second step is fine calibration, which not only identifies the nonlinear parameters, but also improves the accuracy of the parameters identified in the first step. The follow-on system-level calibration is carried out on part of the parameters using specific force error and attitude error to further improve the calibration accuracy. Simulation result shows that by using the proposed three-stage calibration technique in the space-stable INS, the estimation accuracy of accelerometer error can reach 1 x 10(-6) g order of magnitude. Experiment results show that after the three-stage calibration, the accuracy of latitude, longitude, and attitude angles has increased by over 45% and the accuracy of velocity has increased by over 22% during navigation.

Accelerometer optimization based on real-time measurement of Hole Deviation INS with While-Drilling

A Three-dimension High-Precision and Non-contact Dynamic Angular Displacement Measurement System based on Heterodyne Interference

Error Modeling and Compensation of Circular Motion on a New Circumferential Drilling System

An Improved Fast Self-Calibration Method for Hybrid Inertial Navigation System under Stationary Condition

A measuring system for well logging attitude and a method of sensor calibration

A Three-Stage Accelerometer Self-Calibration Technique For Space-Stable Inertial Navigation Systems

Attitude Measurement and Error Compensation for Horizontal Directional Drilling

A Long-Term Performance Enhancement Method for FOG-Based Measurement While Drilling

A Parameter Self-Calibration Method for GNSS/INS Deeply Coupled Navigation Systems in Highly Dynamic Environments

Study of Drill Measuring System Based on MEMS Accelerative and Magnetoresistive Sensor

Low Cost Attitude Determination System for Accelerated Rigid Bodies

Precision tilting platform used for static calibration of accelerometers

A New Norm-Observed Calibration Method Based on Improved Differential Evolution Algorithm for SINS

Study of Mounting Error Compensation Method for the System Design of Non-Gyro Inertial Measurement Unit

Analysis and calibration of the mounting errors between inertial measurement unit and turntable in dual-axis rotational inertial navigation system

An autonomous and high-accuracy gravity disturbance compensation scheme for rotary inertial navigation system

Enhanced Azimuth Determination in Drilling via Piecewise Polynomial Fitting and Interpolation

Online Calibration and Compensation of Accelerometer Assembly for Space-Stable Inertial Navigation Systems

Study on directional logging attitude measurement with gyroscope

Calibrating Accelerometers for Space-Stable Inertial Navigation Systems at System Level

Calibration of accelerometer and magnetometer sensors of MWD systems in directional drilling application