Abstract:Multifunctional open-cell copper foams are widely used in different industrial sections and are featured by their topological microstructures, thus generating robust mechanicalproperties, sound absorption, andthermalconductivity. In this paper, making use of 3D imaging techniques based on micro-CT X-Ray tomography, in situ compression experiments are performed for exploring the deformation features and internal local failure behaviors of open-cell copper foams. During the in-situ compression process, geometrical topological features of deformed samples at different strain levels were reconstructed based on 3D X-ray computed tomography images, and four types of geometrical components were identified in the open-cell copper foam samples, namely strut, node, closed-cell and groove, respectively. Afterwards, several types of finite element models are constructed, finite element analysis is performed and compared with experiments for understanding the deformation process for porous copper samples. In order to improve the mesh quality of finite element models reconstructed from X-Ray tomography images, the mesh was generated through surface fitting technique. Then, the generated mesh was imported into finite element analysis software ABAQUS/Explicit for numerical simulation, simulation results suggest that large amounts of plastic strain localization and structure collapses are formed during the compression process, and such plastic strain localization features are closely related to the initial spatial orientation of struts.

The Dynamic Compressive Behaviors of an Open-Cell Aluminum Foam

Study on the Compression Properties and Deformation Failure Mechanism of Open‐Cell Copper Foam

Early Compressive Deformation of Closed-Cell Aluminum Foam Based on a Three-Dimensional Realistic Structure

Compressive Performance and Deformation Mechanism of the Dynamic Gas Injection Aluminum Foams

Fabrication and Compressive Behavior of Open-Cell Aluminum Foams Via Infiltration Casting Using Spherical CaCl2 Space-Holders

Mechanical Properties of Aluminium Foam and How Density, Temperature, and Strain Rate Affect Dynamic Strain–Stress Relationship

Effects of cell wall property on compressive performance of aluminum foams

Study on Cell Deformation of Low Porosity Aluminum Foams under Quasi‐Static Compression by X‐Ray Tomography

Quasi-static Deformation Mechanism and Compressive Properties of Aluminum Foams Fabricated by Friction Stir Processing

THE MECHANICAL BEHAVIORS OF CLOSED-CELL ALUMINUM-ALLOY FOAMS WITH SPHERICAL PORES

Dynamic and Static Compression Tests and FEA Analyses of Aluminum Foam Specimen with Variable Density in the Loading Direction

High temperature and mesostructure effect on aluminum foam compression responses

Pore Structure and Compressive Properties of Open-Cell Aluminum Foams Prepared by Infiltration Casting Based on NaCl Space-Holder

Coupling Effect Of Porosity And Cell Size On The Deformation Behavior Of Al Alloy Foam Under Quasi-Static Compression

Mechanical Simulation of the Localized Deformation in the Aluminum Foams: A Three-Dimensional (3d) Structure Based Study

Dynamic mechanical properties of closed-cell aluminum foams with uniform and graded densities

Investigations of the failure behaviors of open-cell copper foam based on in-situ X-ray tomography compression experiments and image reconstructed finite element modeling

Compressive Properties and Energy Absorption of Aluminum Foams with a Wide Range of Relative Densities

Assessment of the flow behavior and structural performance of open-cell aluminum foams at critical flow conditions of pressure and temperature

Experimental Study of the Dynamic and Static Compression Mechanical Properties of Closed-Cell PVC Foams

Characterization of Aluminum Foam Impact Response