Abstract:The wear and adhesion of bearing surface under boundary lubrication is the key to the development and application of bearing technology. For improving the antifriction and antiadhesion properties of the bearing materials, the sulfur rich nano self-lubricating thin layers were prepared on the bearing surface by low-temperature sulfide permeation technology. The morphology and composition of the sulfurized layer were characterized microscopically, and the tribological properties of the sulfurized layer were analyzed to reveal the anti-friction and anti-adhesion mechanism of the sulfurized layer on the surface of bearing steel. The results show that the sulfurized layer is flatter and does not contain nanostructures when the formulation does not contain thiourea, and the content of element S is lower. After the addition of thiourea, the surface of the sulfurized layer is formed by the accumulation of nanosheet-like structures. The nano sulfurized layer has higher S-element content and better tribological properties. When thiourea and tartaric acid are added to the sulfurizing formula at the same time, the nano-sheet structure of the sulfurized layer is more dense and uniform. Moreover, the number of microcracks in the sulfurized layer is small, and the tribological properties are further improved. At the same time, the sulfide in the self-lubricating thin layer and the lubricating oil stored in the gaps can make the bearing surface have a typical "liquid-solid synergistic lubrication effect". That is conducive to the formation of the self-lubricating film and the transfer to the dual parts. All these factors improve the antifriction and antiadhesion properties of the bearing materials effectively.

Study on the Tribological Properties of FeS Solid Lubrication Films Prepared by Two-Step Method

Effect of Lubricating Condition on Tribological Properties of Nano-SiO2 Filled Polyamide Composite

Investigation on friction and wear behaviors of FeS films on L6 steel surface

Tribological Properties of WS2 Composite Film Prepared by a Two-Step Method

MICROSTRUCTURES AND WEAR-RESISTANCE BEHAV-IORS OF FERROUS SULFIDE COATINGS

Characterization and tribological properties of plasma sprayed FeS solid lubrication coatings

Investigation on the Tribological Properties of FeS, Cu2S, MoS2, and WS2 Sulfide Films Under Water Lubrication

Microstructures and tribological properties on the composite MoS2 films prepared by a novel two-step method

The Effect of Solid-Liquid Composite Lubrication on the Tribological Properties of Bearing Steel

Comparison of the tribological properties of an ion sulfurized coating and a plasma sprayed FeS coating

The friction–reduction model of the iron sulfide film prepared by plasma source ion sulfuration

Characterization and anti friction behaviors of FeS coating

Microstructures and Anti-friction Property of Sprayed Sulfide Coating

Study on tribological properties of iron sulfide coatings prepared by a sol-gel method

Tribological performance analysis of nano-FeS films deposited on the surface of bearing steel

Tribological behavior of sol-gel FeS coating

Preparation and properties of FeS/iron-based self-lubricating materials by chemical nickel plating-mechanical alloying

Preparation Methods and Research of Tribological Behaviors of Ferrous Sulfide Coatings

Model on Anti-friction Mechanism of Solid Lubrication FeS Layer

Development of Research on the Layered Solid Lubrication Films

Preparation and tribological properties of Mo/MoS2-Pb-PbS composite films