Abstract:The wear and adhesion of bearing surface under boundary lubrication is the key to the development and application of bearing technology. For improving the antifriction and antiadhesion properties of the bearing materials, the sulfur rich nano self-lubricating thin layers were prepared on the bearing surface by low-temperature sulfide permeation technology. The morphology and composition of the sulfurized layer were characterized microscopically, and the tribological properties of the sulfurized layer were analyzed to reveal the anti-friction and anti-adhesion mechanism of the sulfurized layer on the surface of bearing steel. The results show that the sulfurized layer is flatter and does not contain nanostructures when the formulation does not contain thiourea, and the content of element S is lower. After the addition of thiourea, the surface of the sulfurized layer is formed by the accumulation of nanosheet-like structures. The nano sulfurized layer has higher S-element content and better tribological properties. When thiourea and tartaric acid are added to the sulfurizing formula at the same time, the nano-sheet structure of the sulfurized layer is more dense and uniform. Moreover, the number of microcracks in the sulfurized layer is small, and the tribological properties are further improved. At the same time, the sulfide in the self-lubricating thin layer and the lubricating oil stored in the gaps can make the bearing surface have a typical "liquid-solid synergistic lubrication effect". That is conducive to the formation of the self-lubricating film and the transfer to the dual parts. All these factors improve the antifriction and antiadhesion properties of the bearing materials effectively.

Characterization and anti friction behaviors of FeS coating

Tribological behavior of sol-gel FeS coating

MICROSTRUCTURES AND WEAR-RESISTANCE BEHAV-IORS OF FERROUS SULFIDE COATINGS

Microstructures and Anti-friction Property of Sprayed Sulfide Coating

Investigation on friction and wear behaviors of FeS films on L6 steel surface

Characterization and tribological properties of plasma sprayed FeS solid lubrication coatings

Microstructures and friction-reduction performances of the graphite coatings

Study on the Tribological Properties of FeS Solid Lubrication Films Prepared by Two-Step Method

Study on tribological properties of iron sulfide coatings prepared by a sol-gel method

The friction–reduction model of the iron sulfide film prepared by plasma source ion sulfuration

Comparison of the tribological properties of an ion sulfurized coating and a plasma sprayed FeS coating

Model on Anti-friction Mechanism of Solid Lubrication FeS Layer

The Tribological Properties Of Ion Sulfurized Die-Steel Under Dry Sliding Condition

The Iron Sulfide Coatings Prepared by Plasma Spraying and Their Friction-Reduction Performance

An investigation of fretting wear behaviors of bonded solid lubricant coatings

Tribological performance analysis of nano-FeS films deposited on the surface of bearing steel

Structure and Friction-Reducing Property of the Sulfide Layer Produced by Ion Sulfuration

Study on the Self-Organization of an Fe-Mn-C-B Coating during Friction with Surface-Active Lubricant

The Effect of Solid-Liquid Composite Lubrication on the Tribological Properties of Bearing Steel

Investigation on the Tribological Properties of FeS, Cu2S, MoS2, and WS2 Sulfide Films Under Water Lubrication

Surface Characterization and Tribological Properties of Sol-Gel Graphite Coatings