Abstract:<p>Imaging surface deformation of a coupon specimen in micro‐tensile testing with an optical microscope presents challenges due to the narrow depth of field (DoF) of optical microscopes. Materials being heterogeneous at microscopic length scale, the sample surface deforms into a complex 3D surface texture, evolving continuously as the loading increases. Because of the narrow DoF, the region that is in focus within the field of view (FoV) decreases substantially in size with the increasing out‐of‐plane heterogeneous deformation. To address this challenge, a method based on image blending and stabilization of the captured image frames is proposed. Image blending combines the partial regions that are in focus from a set of successive image frames captured at different working distances from the object surface plane to construct a single image that has a large part of the FoV in focus. The blended images are then obtained at different levels of macroscopic strains, i.e. the global homogeneous strain, in order to characterize the evolution of the heterogeneous deformation. The image stabilization removes any misalignments of the blended images by spatially realigning them choosing a common feature as a reference point. The validation of the proposed method with conventionally and additively manufactured stainless steel 316L (SS 316L) specimens demonstrates excellent improvement in image quality. Almost 100% of the FoV is maintained in focus regardless of the amount of out‐of‐plane heterogeneous deformation caused during tensile testing, which is quite remarkable for optical microscopy imaging. Consequently, the blended and stabilized images enhanced the accuracy of digital image correlation (DIC). Time‐lapse videos of the deformation generated using these images captured the evolution of the slip bands and their transmission through twinning boundaries in the stainless steel microstructure. Overall, this study demonstrates the feasibility of using image‐processing techniques to advance optical microscopy to image complex 3D surfaces evolving with time.</p><p>This article is protected by copyright. All rights reserved</p>

A New Optical Method for Macro and Micro-zone Strain Measurements

On the Propagation and Pulsation of Portevin-Le Chatelier Deformation Bands: an Experimental Study with Digital Speckle Pattern Metrology

Surface Patterning for Multi-Scale Strain Analysis of In-Situ Sem Mechanical Experiments

In Situ and Real-Time Tensile Testing of Thin Films Using Double-Field-of-view Electronic Speckle Pattern Interferometry

Direct strain measurement method based on the correlation of defocused laser speckle pattern

New Methods for Measuring Mechanical Properties of Thin Films in Micromachining: Beam Pull-in Voltage (VPI) Method and Long Beam Deflection (LBD) Method

Space-resolved diffusing wave spectroscopy measurements of the macroscopic deformation and the microscopic dynamics in tensile strain tests

Phase-shifting Laser Scanning Confocal Microscopy Moiré Method and Its Applications

Multi-Directional Strain Measurement in Fiber-Reinforced Plastic Based on Birefringence of Embedded Fiber Bragg Grating

Optical Full-Field Technique for Measuring Deformation on Micromechanical Components

High‐resolution optical microscopy for characterising microstructural deformation in microtensile testing

3D Strain Measurement of Heterostructures Using the Scanning Transmission Electron Microscopy Moire Depth Sectioning Method

Optical strain sensor using median density grating foil: Rivaling the electric strain gauge

Full field and microregion deformation measurement of thin films using electronic speckle pattern interferometry and array microindentation marker method

Non-destructive mapping of stress, strain and stiffness of thin elastically deformed materials

Deformation Fields Measurement of Crack Tip under High-Frequency Resonant Loading Using a Novel Hybrid Image Processing Method

Morphology characterization and in-situ three-dimensional strain field monitor of short carbon fiber-reinforced polymer composites under tension

Diffraction-Based Multiscale Residual Strain Measurements

Virtual fields method coupled with moiré interferometry: Special considerations and application

STEM multiplication nano-moiré method with large field of view and high sensitivity

3D Strain Measurement of Heterostructures Using the Scanning Transmission Electron Microscopy Moiré Depth Sectioning Method