Abstract:The hysteresis of rubber materials due to deformation and viscoelasticity is the main reason for the heat build-up (HBU) and rolling resistance (RR) of the rolling tire. It is important to realize the high precision prediction of HBU and RR of tire for the optimal design of high-performance fuel-saving tire. In this work, a thermo-mechanical coupling method based on Endurica and Abaqus co-simulation was used to predict the steady-state temperature distribution and RR of three finite element models (Lagrangian–Eulerian model, Lagrangian model, and Plane Strain model) of the solid tires under different loads and rotating speeds. The simulation results were compared with the experimental results. The Kraus self-heating model was utilized in the thermo-mechanical coupling method, which realized the quantitative relationship between the dynamic loss modulus of rubber and the loading conditions (temperature, strain, and strain rate). Special attention was paid to the determination of the material parameters in the Kraus self-heating model. The comparison between simulation results and experimental results shows that the Lagrangian model had the highest prediction accuracy, and the average prediction errors of the steady-state surface temperature and RR under three loading conditions were 3.4% and 7.9%, respectively. The Lagrangian–Eulerian model came in the second with average errors of 9.7% and 11.1%, respectively. The Plane Strain model had the worst prediction accuracy, with the average errors of 21.4% and 44.6%, respectively. In terms of the simulation time, the Plane Strain model had the lowest cost, and the average calculation time was 1143 s. The Lagrangian–Eulerian model took the second place, with an average calculation time of 2621 s. The Lagrangian model had the highest computation cost, with an average time of 5597 s. The comparison between the simulation results and the experimental results verified the effectiveness of the thermo-mechanical coupling analysis method. The methods of three finite element models of the solid tires in this work can provide some reference for the optimization design of elastomeric components (Lagrangian model), pneumatic tires (Lagrangian–Eulerian model), and non-pneumatic tires (Plane Strain model).

Finite Element Analysis for Steady Temperature on the Rolling Tire Based on the Numerical Inverse of Tests

Analyzing Performance of Automobile Brake Drum in 3D Thermo-elastic Coupling Field

Finite Element Analysis of the Thermal Characteristics and Parametric Study of Steady Rolling Tires

Study on Mechanics of Steady State Free Rolling Tires

Tire cornering simulation using finite element analysis

Fatigue Life Evaluation of Aluminum Alloy Automotive Wheels Cornering Test Based on Finite Element Analysis

ANALYSIS STUDY ON BENDING FATIGUE TEST OF AUTOMOBILE WHEELS

A Finite Element Model for the Rolling Loss Prediction and Fracture Analysis of Radial Tires

Finite Element Analysis for Steady-State Rolling of Radial Tire

Finite Element Analysis For Tire Tread Wear Under Typical Loading Conditions

Research on simplified tire finite element modeling and simulation method

Truck Tire Thermal-Mechanical Fea and Dma with Application to Endurance Evaluation

Heat Build-Up and Rolling Resistance Analysis of a Solid Tire: Experimental Observation and Numerical Simulation with Thermo-Mechanical Coupling Method

Steady-State Temperature Field and Rolling Resistance Characteristics of Low-Speed and Low-Load Capacity Non-Pneumatic Tires

Isogeometric Analysis for Accurate Modeling of Rolling Tires

Finite Element Analysis for Tread Wear of Radial Tire

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

Theory and Method of Tire Rolling Kinematics and Prediction of Tire Forces and Moments

FINITE ELEMENT ANALYSIS FOR SLIDING ABRASION OF TREAD BLOCKS OF RADIAL TIRE

Prediction of rolling resistance and wheel force for a passenger car tire: A comparative study on the use of different material models and numerical approaches

Simulation of Steady-State Rolling Non-Pneumatic Mechanical Elastic Wheel Using Finite Element Method