Abstract:The propagation of light from a singlemode fiber (SMF) to a multimode fiber (MMF) arouses a series of eigenmodes, which interference together along the MMF where the positions of the local maximum intensity are the self-imaging points (SIPS). When the light in the MMF propagates to a SMF, the maximum coupling efficiency is obtain when the SMF and MMF connect at a SIP. However the connection generally deviates the SIPs for the accurate connection is difficult to be achieved, which decreases the accuracy of the sensor severely. Herein a novel vibration sensor based on the singlemode multimode singlemode (SMS) fiber is developed, in which the MMF is etched, which turns the SIP to the connection of the MMF and the output SMF accurately. The etched SMS structure dispenses with the requirement of highly accurate connection at a SIP and provides a succedaneous scheme that is sensitive to vibration. The etched sensor responses to the vibration more easily comparing to the un-etched one. Experimental results demonstrate that the sensitivity of the SMS sensor with the both ends etched is respectively over 5 and 40 times as that of the middle etched and un-etched one. When the MMF length decreases from 8 to 2 cm, the vibrating sensitivity of the sensor increases 13.5 times. Experimental results demonstrate that the etched structure with MMF length of 2 cm responses well to the acoustic wave from 20 to 300 Hz, where a pressure sensitivity of 1.49 mV/mPa and linear correlation index of 0.9980 can be attained at 120 Hz. (C) 2018 Elsevier B.V. All rights reserved.

A FIBER OPTIC SENSOR ON MEMS VIBERATION

Optical Inertial Vibration Sensor System Using Grating Technology

Vibration-Displacement Measurement Employing Phase Tracking Technique with an Optical Fiber Michelson Interferometer

A Novel Demodulation Scheme of Fiber-Optic Interferometric Sensor Based on FM SSB Signal

Vibration Measurement of Smart Composite Structures by Using the New Intensity Modulated Optical Fiber Sensor

A Multichannel Optic Fiber Sensing System Based on Hybrid Sagnac Structure

Acoustic Frequency Vibration Sensor Based on Tapered SMS Fiber Structure

Fiber-Optic Vibration Sensor Based on Beat Frequency and Frequency-Modulation Demodulation Techniques

A Fiber Bragg Grating Sensing-Based Micro-Vibration Sensor and Its Application

Low-Frequency Vibration Sensor with Dual-Fiber Fabry–Perot Interferometer Using a Low-Coherence LED

Optical Fiber Bending Sensor Based on Michelson Interferometer

Fiber optic vibration sensor for applications in the field of ground vibrations

A Vibration Sensor Based on Fiber Bragg Grating Fabry-Perot Cavity

Flexible Optical Fiber Fabry–Perot Interferometer Based Acoustic and Mechanical Vibration Sensor

Optical Fiber Low-Frequency Vibration Sensor Based on Butterfly-Shape Mach-Zehnder Interferometer

High-Frequency Vibration Sensor Using a Fiber Laser With a Multicore Fiber Interferometer

A dynamic spectral demodulation scheme of the fiber optical Fabry-Perot sensor for low-frequency vibration detection

Non-contact Fiber Vibration Sensor based on Intracavity Modulation of an Extrinsic Fabry-Perot Interferometer

Development of A Distributed Fiber Sensor for Simultaneous Strain and Vibration Measurement

Broadband Vibration Detection in Tissue Phantoms Using a Fiber Fabry-Perot Cavity

An Optical Fiber Cantilever Beam Ultrasound Sensor Based on MI Structure