Abstract:The mechanical properties of nickel-based single crystal superalloys deteriorate with increasing misorientation, thus the finished product rate of the casting of single crystal turbine airfoils may be reduced due to the formation of grain boundaries especially when the misorientation angle exceeds to some extent. To this day, evolution of the microstructures at the grain boundaries with misorientation and the relationship between the microstructures and the mechanical properties are still unclear. In this work a detailed characterization of the misorientation related microstructure at the grain boundary in DD6 single crystal superalloy has been carried out using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques; the elemental distribution at the grain boundaries has been analyzed by energy dispersive (EDS) X-ray mapping; and the effect of precipitation of μ phases at the grain boundary on the mechanical property has been evaluated by finite element calculation. It is shown that the proportion of γ phase at the grain boundaries decreases, while the proportion of γ′ phase at the grain boundaries increases with increasing misorientation; the μ phase is precipitated at the grain boundaries when the misorientation angle exceeds about 10° and thus it could lead to a dramatic deterioration of the mechanical properties, as well as that the enrichment of Re and W gradually disappears as the misorientation angle increases. All these factors may result in the degradation of the mechanical properties at the grain boundaries as the misorientation increases. Furthermore, the finite element calculation confirms that precipitation of μ phases at the grain boundary is responsible for the significant deterioration of the mechanical properties when the misorientation exceeds about 10°. This work provides a physical imaging of the microstructure for understanding the relationship between the mechanical properties and the misorientation of the grain boundaries in the single crystal superalloy. Based on our study we hope that we can offer some scientific basis for further improvement of the nickel-based single crystal superalloys.

In situ study of the orientation evlution of a Ni?base single crystal superalloy during short?time aging treatment

Structural Evolution of Topologically Closed Packed Phase in a Ni-based Single Crystal Superalloy

Experimental Investigation on Recrystallization Mechanism of a Ni-base Single Crystal Superalloy

In-situ fatigue behavior study of a nickel-based single-crystal superalloy with different orientations

Temperature Effects on Deformation Substructures and Mechanisms of a Ni-based Single Crystal Superalloy

Orientation and temperature dependence of yielding and deformation behavior of a nickel-base single crystal superalloy

Study of Aging Temperature on the Thermal Compression Behaviors and Microstructure of a Novel Ni-Cr-Co-Based Superalloy

Effect of Orientation on the Microstructure of Nickel‐based Crystalline Superalloys

Aging process design based on the morphological evolution of γ′ precipitates in a 4th generation nickel-based single crystal superalloy

Effect of misorientation on the fatigue life of nickel-base single crystal superalloy DD5 at 980 °C

Effects of Crystal Orientation and External Stress on the Static Recrystallization Behavior of an Ni-Based Single-Crystal Superalloy

Correlations Between Microstructure Evolution and Mechanical Behavior of a Nickel-Based Single Crystal Superalloy with Long-Term Aging Effects

Effect of Heat Treatment on the Microstructure and Fracture Behaviors of a Ni–Cr–Fe Superalloy

Influence of thermal exposure on microstructural stability and tensile properties of a new Ni-base superalloy

Lattice Rotation and Deformation Mechanisms under Tensile Loading in a Single-Crystal Superalloy with [001] Misorientation

Microstructure evolution behavior of Ni3Al (γ′) phase in eutectic γ-γ′ of Ni3Al-based alloy

In Situ Study of the Microstructural Evolution of Nickel-Based Superalloys with High Proportional Twin Boundaries Obtained by High-Temperature Annealing

Microstructure and orientation variation during cell/dendrite transition in directional solidification of a single crystal nickel-base superalloy

Misorientation Related Microstructure at the Grain Boundary in A Nickel-Based Single Crystal Superalloy

Influence of crystal orientation on cellular growth of a nickel-base single crystal superalloy

In-situ Observations of the Effects of Orientation and Carbide on Low Cycle Fatigue Crack Propagation in a Single Crystal Superalloy