Abstract:<p>High-precision aspheric negative plastic lenses are widely used in optical systems owing to their excellent performance and ease of high-efficiency manufacturing. The imaging performance of the lens is difficult to control, because it is unable to perform optical measurements directly and is sensitive to manufacturing processing meanwhile. Generally, the imaging performance is guaranteed by a strict control of geometrical deviation, such as Peak-to-Valley (PV) and Root-Mean-Square (RMS). In this study, an optical ray-tracing algorithm with the measured geometrical deviation data is proposed to perform an imaging performance analysis correlated with geometrical deviation for the injection molded high-precision aspheric negative plastic lens. Taguchi experiments are applied to investigating the effect of processing parameters. The geometrical deviation of the convex surface is found to be an order of magnitude greater than that of the concave surface. The geometrical dimension of the concave surface is mainly determined by the machining precision of the mold cavity surface, whereas the convex surface dimension is mainly affected by the lens shrinkage. However, the imaging performance has a nonlinear correlation with the geometrical deviation. Modulation Transfer Function (MTF) and Spot Diagram are equivalently affected by the concave and convex geometrical deviations, and depend on the object field height. The effect of processing parameters on geometrical deviation and imaging performance is uncorrelated. Thus, the imaging performance should be simultaneously considered as a criterion as well as the geometrical deviation in the optimization of aspheric negative lens injection molding processing. The imaging performance prediction using an optical ray-tracing algorithm with the measured geometrical deviation data is instrumental to optimize the manufacturing processing.</p>

The application of image quality compensation methods in fine assembly of the high resolution lens

Research of precision interference locating method for a partial null compensator at aspheric testing

Design and testing of optical inspection lens with large-field and high resolution

Optimization of Longitudinal Alignment of an 4<i>f</i> System in a Compact Vectorial Optical-Field Generator Based on a High-Resolution Liquid Crystal Spatial Light Modulator

Dynamic Compensation for the Lithographic Object Lens

A simulation imaging method for actual optical system and results analysis

A New Approach for Tolerance Sensitivity Reduction in Lens Optimization by Controlling the First Order Derivatives of Real Ray Height on Pupil

Full Field Adaptive Tolerance Analysis of Extreme Ultraviolet Lithography Objective

Simulation Of Aspheric Tolerance With Polynomial Fitting

Two methods to loosen optical manufacture tolerances for ArF projection optics

Optimization method to eliminate the influence of the conical acoustic lens on the transmission of laser beam using ZEMAX

Automatic Figure Errors Balancing Method for Catoptric and Catadioptric Lenses

Confocal Position Alignment in High Precision Wavefront Error Metrology Using Shack-Hartmann Wavefront Sensor

Research on assembling and adjusting technology of aspherical refraction optical lens

An imaging performance analysis method correlated with geometrical deviation for the injection molded high-precision aspheric negative plastic lens

Mixed compensation for the testing of large convex aspheres

Optical Surface Error Analysis and Compensation Technique Based on Zernike Polynomial Coefficients

Evaluation of Surface Quality and Error Compensation for Optical Aspherical Surface Grinding

Compensation Ability Evaluation of Part-Compensation Lens Based on Slope Asphericity

Computer-aided Alignment for High Precision Lens

Imaging Quality Prediction and Preload Optimization for a Precision Optical System Considering Assembly Errors