Abstract:S-band fiber lasers, one type of ytterbium doped fiber lasers(YDFLs) which emitting in the spectral region of 1010 nm similar to 1050 nm, have drawn more and more attention especially after the proposition of tandem pump fiber lasers. The S-band laser plays an important role as the pump in a tandem pumping scheme. However, high power S-band laser output is quite difficult because of severe re-absorption. Therefore, the optical properties of S-band fiber lasers are studied and methods to achieve high power S-band laser output are presented. An S-band laser emission model based on gain comparison is built for analyzing the mechanism of laser oscillation and amplification. The model is composed of rate equations and gain comparison of several wavelengths in ASE spectrum. The gain differential between laser wavelength and ASE peak wavelength is compared to the additional gain imposed by cavity mirrors in an oscillator or the seed in an amplifier. The comparison results help in concluding the feasibility of S-band laser emission. Based on the model, the influences of fiber properties (including core doping level, core -clad ratio, and fiber length), pump power and laser power on the operation of S-band fiber lasers or amplifiers are researched. The analysis shows that fibers with lower doping level, larger core-clad ratio and shorter length, seed with higher power, are more helpful in realizing high power S-band laser output. Also, the profile of oscillator is found more suitable in building high power S-band lasers than that of amplifier.

Theoretical Analysis of Erbium-doped Superfluorescent Fiber Source in Double-pass Backward Configuration

The Numerical Analyses for Erbium-Doped Superfluorescent Fiber Sources

High-Stability and Broad-Band Erbium-Doped Superfluorescent Fiber Source

Theoretical and Experimental Analysis of Bidirectionally Pumped 1.3 Μm Pr3+-doped ASE Source

Experimental Realization of A Pbse Quantum Dot Doped Fiber Amplifier with Ultra-Bandwidth Characteristic

A New Three-stage Structure for a High-performance L-band Erbium-doped Superfluorescent Fiber Source

Characteristic Analysis of Praseodymium Doped Superfluorescent Fluoride Fiber Source Operating at 1.3 Μm

Theoretical and Experimental Investigations on Erbium-Doped Fiber Amplifiers

THE NUMERICAL MODELING OF ERBIUM-DOPED SUPERFLUORESCENT FIBER SOURCE

Studies of Central Wavelength of High-Power All-Fiber Superfluorescent Sources with Yb-Doped Double-Clad Fibers

Amplification and Spontaneous Emission of Er-doped Fiber Both in Theory and Experiment

High-power single-stage thulium-doped superfluorescent fiber source

301 W Narrow-Linewidth In-Band Pumped Er:Yb Co-Doped Fiber Amplifier at 1585 Nm and Related Modeling for Dynamics Study and Optimization

Forward-pumping Dual-stage Double-pass Broadband Erbium-doped Fiber Source

Spectral Evolution and Stimulated Brillouin Scattering Suppression in Phase-Modulated Fiber Amplifier

Review of Fiber Superluminescent Pulse Amplifications

Toward an ultra-broadband emission source based on the bismuth and erbium co-doped optical fiber and a single 830nm laser diode pump.

Experimental investigation of supercontinuum generation in highly nonlinear dispersion-shifted fiber pumped by spectrum-sliced amplified spontaneous emission

Numerical investigations of double pass, highly selective FBG based DFB-EDFA system for enhanced gain and ASE-mitigation

High-power all-fiber superfluorescent source with fused angle-polished side-pumping configuration.

Optical Properties of High Power S-Band Fiber Oscillators and Amplifiers