Abstract:Spatially resolved spectroscopy provides a means for measuring the optical properties of biological tissues, based on analytical solutions to diffusion approximation for semi-infinite media under the normal illumination of an infinitely small light beam. The method is, however, prone to error in measurement because the actual boundary condition and light beam often deviate from that used in deriving the analytical solutions. It is therefore important to quantify the effect of different boundary conditions and light beams on spatially resolved diffuse reflectance in order to improve the measurement accuracy of the technique. This research was aimed at using finite element method (FEM) to model light propagation in turbid media, subjected to normal illumination by a continuous-wave beam of infinitely small or finite size. Three types of boundary conditions [i.e., partial current (PCBC), extrapolated (EBC), and zero (ZBC)] were evaluated and compared against Monte Carlo (MC) simulations, since MC could provide accurate fluence rate and diffuse reflectance. The effect of beam size was also investigated. Overall results showed that FEM provided results as accurate as those of the analytical method when an appropriate boundary condition was applied. ZBC did not give satisfactory results in most cases. FEM-PCBC yielded a better fluence rate at the boundary than did FEM-EBC, while they were almost identical in predicting diffuse reflectance. Results further showed that FEM coupled with EBC effectively simulated spatially resolved diffuse reflectance under the illumination of a finite size beam. A large beam introduced more error, especially within the region of illumination. Research also confirmed an earlier finding that a light beam of less than 1 mm diameter should be used for estimation of optical parameters. FEM is effective for modeling light propagation in biological tissues and can be used for improving the optical property measurement by the spatially resolved technique. (C) 2015 Optical Society of America

THE NUMERICAL MODELING OF ERBIUM-DOPED SUPERFLUORESCENT FIBER SOURCE

The Numerical Analyses for Erbium-Doped Superfluorescent Fiber Sources

Enhancing the performance of fluorescence emission difference microscopy using beam modulation

Study of an Unsaturated PbSe QD-Doped Fiber Laser by Numerical Simulation and Experiment

Numerical Analysis of Temporal Stimulated Brillouin Scattering in Optical Fiber

Theoretical Analysis of Erbium-doped Superfluorescent Fiber Source in Double-pass Backward Configuration

Finite element modeling of light propagation in turbid media under illumination of a continuous-wave beam

Finite element modeling of light propagation in fruit under illumination of continuous-wave beam

Three-Dimensional Super-Resolution Imaging for Fluorescence Emission Difference Microscopy

High-Stability and Broad-Band Erbium-Doped Superfluorescent Fiber Source

A New Three-stage Structure for a High-performance L-band Erbium-doped Superfluorescent Fiber Source

Multiparameter-dependent Spontaneous Emission in PbSe Quantum Dot-Doped Liquid-Core Multi-Mode Fiber

Modeling the 3-micron Class Er-Doped Fluoride Fiber Laser with a Cubic Energy Transfer Rate Dependence

Breaking the Diffraction Barrier Using Fluorescence Emission Difference Microscopy

Rare Earth Doping Effect on the Optical Properties of Several Fluorescence Materials

SUPERFLUORESCENCE CHARACTERISTICS OF ER-DOPED SILICA FIBER

Studies of Central Wavelength of High-Power All-Fiber Superfluorescent Sources with Yb-Doped Double-Clad Fibers

Theoretical and Experimental Investigations on Erbium-Doped Fiber Amplifiers

Rayleigh Scattering in an Emitter-Nanofiber-coupling System

Modeling light propagation through taper-microfiber structures integrated on substrates