Abstract:On the basis of previous experimental studies of two-phase flow condensation heat transfer for R134a inside the horizontal micro-fin tubes, a theoretically analysis of heat transfer characteristic combining both heat transfer mechanism and flow mechanism is discussed by the experimental data of heat transfer coefficient and pressure drop, to further clarify the influence of experimental condition and tube structure on heat transfer characteristics under the special working condition. Two performance factors, enhancement factor (EF) and penalty factor (PF), are introduced to quantitatively compare the effect of micro-fin on the heat transfer coefficient and the pressure drop between enhance tube and smooth tube. Meanwhile, the comprehensive factor, CHF, is applied to evaluate the comprehensive performance of heat transfer tube. It was found that enhancement factor (EF) and penalty factor (PF) both increase with increasing mass flux and fin helical angle, and decreasing saturation temperature, the comprehensive factor, CHF, is always greater than one and increases with increasing fin helical angle and mass flux, and decreasing saturation temperature. Moreover, based on the comparative analysis findings that some existing correlations of heat transfer characteristics underestimate most of the experimental data, and the experimental variable has great influences on the correlation prediction accuracy, such as mass flux, which is proportionate to the prediction deviation of correlation. Therefore, a new correlation was developed through analyzing quantitatively influencing mechanism of the experimental variable on the heat transfer characteristics, in a way that a two-phase frictional multiplier is defined firstly from the experimental data and then the forced convection heat transfer mechanism is redefined based on the comprehensive effect of various experimental variables. By the experimental data verification, the new correlation shows good prediction effect with the mean deviation of less than 5%.

Study on Phase Change Flow and Heat Transfer Characteristics of Chevron Corrugated Plate

Study on the effect of three key geometric parameters of chevron corrugated brazed plate heat exchanger on the heat transfer performance

Comparative Study on the Characteristics of Film Flow with Different Corrugation Plates

A numerical and experimental study of chevron, corrugated-plate heat exchangers

Heat Transfer Study of a Hybrid Smooth and Spirally Corrugated Tube

Thermohydraulic analysis of hybrid smooth and spirally corrugated tubes

Exploration of Dual-Phase Change Coupled Heat Transfer in Solar Regenerative Evaporator

Numerical and experimental studies of flow and heat transfer characteristics in a plate heat exchanger with multi-chevron corrugate furrows

Theoretical and Experimental Analyses of Two-Phase Flow Condensation Heat Transfer Inside the Horizontal Micro-Fin Tube

Thermo-hydrodynamic Analysis of a Nitrogen Flat-Plate Pulsating Heat Pipe Using CFD Modeling and Visualization Experiments

Numerical Analysis of Air Flow Resistance and Heat Transfer Between Corrugated Plates with Channels of Varied Heights

Numerical simulation of flow boiling heat transfer and pressure drop in a corrugated plate heat exchanger at low mass flux and vapor quality conditions

Numerical investigation on cooling heat transfer and flow characteristics of supercritical CO2 in spirally fluted tube at various inclination angles

Numerical investigation on falling film flow and heat transfer characteristics over corrugated plates

Influence of corrugated jet plates on internal heat transfer and flow dynamics of double-wall cooling: experimental-numerical approach

Experimental and CFD investigation on the thermal performance of two phase closed thermosyphons: Effect of corrugated evaporator

Single Phase And Two Phase Flow Characteristics And Heat Transfer In Micro-Fin Tubes

Visualization and heat transfer comparative analysis of two phase closed thermosyphon

Experimental investigation of two-phase flow in Chevron-type compact plate heat exchangers: A Study on pressure drops and flow regimes visualization

Effect of flow path on the performance of plate heat exchanger with chevron shape

An experimental study of the flow and heat transfer between enhanced heat transfer plates for PHEs