Abstract:The breeder blanket and divertor are crucial plasma facing components in a fusion reactor. The helium cooled blanket and divertor concepts have exhibited the best potential to come up to the highest safety requirements and therefore been chosen for the development object. As a result of high heat flux radiated from the plasma in the fusion reactor and high power density nuclear heat deposited by high-energy neutrons, the cooling of the first wall (FW) and the discharge of nuclear heat have become one of the major technical challenges. To demonstrate and verify the helium-cooled technology and tools of China test blanket module, and explore the feasibility and key technology of thermal hydraulics process of helium-cooled divertor, we have creatively adopted the "filling-evacuating" approach to design and fabricate the high-pressure helium-cooled loop (HPHCL), in which a mock-up of reduced-scale helium-cooled blanket module is designed and manufactured as a test section. Based on different experimental cases, the operating pressures of helium at mockup range from 3 to 10 MPa and the maximum mass flow rate can reach up to 0.21 kg/s. In this paper, the design scheme of the HPHCL is presented, and the key issues of engineering manufacture and the test cases are calculated and analyzed. The helium gas flow and the heat transfer are calculated according to the test working conditions of the referenced International Thermonuclear Experimental Reactor TBM's FW surface heat flux, using ANSYS fluid dynamics software FLUENT. The results will provide support for the follow-up fabrication of test system and implementation of the tests.

Engineering structure design and fabrication process of small sized China helium-cooled solid breeder test blanket module

Preliminary Design for a China ITER Test Blanket Module

Progress on Design and R&D of CN Solid Breeder TBM FTP/3-5Ra

Updated design and development on key technology for CH HCCB TBM

Technical Issues for the Fabrication of A Cn-Hccb-Tbm Based on Rafm Steel Clf-1

Progress on design and R&D for helium-cooled ceramic breeder TBM in China

Overview of Design and R&D of Solid Breeder TBM in China

Progress on Solid Breeder TBM at SWIP

New Progress on Design and R&D for Solid Breeder Test Blanket Module in China

Structural design for the back plate of sub-module of CH HCCB TBM with 1×4 configuration

Current Progress of Chinese HCCB TBM Program

Neutronics design and optimization for ITER helium cooled ceramic breeder test blanket module

Analysis and design of neutronics for an ITER test blanket module

A New Modular Design Concept for China's HCSB TBM in ITER

Current Design And R&D Progress Of The Chinese Helium Cooled Ceramic Breeder Test Blanket System

Development of manufacturing technology for the full-size WCCB module

Neutronics and Thermo-hydraulic Characteristic Studies of Supercritical Water Cooled Solid Breeder Test Blanket Module

Thermo-Hydraulic Analysis Of The Optimized Helium Cooled Solid Breeder Blanket For Cfetr

Thermal-Hydraulic Analysis of Design Basis Accidents for Chinese Helium-Cooled Solid Breeder Tbm

Design and Analysis of “Filling-Evacuating” High-Pressure Helium-Cooled Loop

Three-dimensional Thermal-Hydraulics/neutronics Coupling Analysis on the Full-Scale Module of Helium-Cooled Tritium-Breeding Blanket