Abstract:The temperature effect caused by high slip has an important influence on the operation performance and reliability of magnetic coupling. Taking the self-developed single disk asynchronous magnetic coupling as the research object, the heat loss equation of the magnetic coupling is established. Based on the three-dimensional transient magnetic field simulation model of the magnetic coupling, the eddy current loss, torque, and eddy current distribution law of the magnetic coupling are obtained through simulation. The space flow field and structure temperature field distribution of the magnetic coupling are analyzed by using the fluid-thermal coupling simulation method, and the heat dissipation coefficient and temperature distribution law of the structure surfaces such as copper disk, the back lining yoke iron disk, and the aluminum disk are obtained. The test platform was built to test the torque and temperature of the magnetic coupling. The results show that the error between the test and simulation is 4.8% in the torque aspect, and the maximum error between the test and simulation is only 8.1% in the temperature aspect of each component, which further verifies the effectiveness of the simulation method. On this basis, three heat dissipation improvement schemes are proposed, including installing heat dissipation blocks, setting semicircular grooves on the back lining yoke iron disk, and a hybrid design. The results show that the degree of improvement for each scheme is in the following order: hybrid design, setting semicircular grooves on the back lining yoke iron disk, and installing heat dissipation blocks. Under the hybrid design, the temperature of the back lining yoke iron plate and a copper plate of the magnetic coupling is reduced by about 8.5 °C compared with the original model, and the effect is ideal. The research results can provide an optimization reference for high-speed magnetic coupling and the temperature effect caused by an overload-locked rotor.

Analysis of eddy current loss of HTS-SMES conduction-cooled plate

35 Kj/7 Kw Conduction-cooled High Tc Superconducting Magnet Energy Storage

Development of a Conduction-Cooled HTS SMES

Apparatus and Experiment of High Temperature Superconducting Magnetic Energy Storage Used for Power System Stability Enhancement

Loss Analysis of Magnet Eddy Current in a High-Power Density Machine Using a Field-Circuit Coupled Model

A multimodule hybrid converter for high-temperature superconducting magnetic energy storage systems (HT-SMES)

3-D Modeling of AC Loss in D-Shaped HTS Coils Using and - Formulation-Based Finite Element Methods

Optimized Design and Electromagnetic-Thermal- Mechanical Analysis of a Toroidal D-Shaped Superconducting Magnet in 5 MW LIQHY-SMES System

Stepped-shape Field Winding Optimization of a Large Capacity HTS Aircraft Propulsion Machine

The optimal design of 300MJ HTS superconducting magnetic energy storage system

Stress Reduction And Storage Capacity Enhancement Of The Hts-Smes Using Reinforcing Overbanding Structure

Eddy Current Loss and Thermal Control of Giant Magnetostrictive Transducer

Electromagnetic and Thermal Coupling Analysis of a Water-Cooled Double-Sided Permanent Magnet Linear Synchronous Motor

Optimisation and Loss Analyses of Pulsed Field Magnetisation in a Superconducting Motor with Cryocooled Iron Cores

ANALYSIS OF ELECTROMAGNETIC FIELDS AND EDDY CURRENT LOSSES IN LARGE POWER TRANSFORMERS

Electromagnetic–Thermo–Mechanical Coupling Behavior of Cu/Si Layered Thin Plate under Pulsed Magnetic Field

3-D analysis of eddy current losses in permanent PMSM magnets

Temperature Calculation, Test and Structure Improvement of Magnetic Coupling under High Slip

Design of a 30-K/4-kj HTS Magnet Cryocooled with Solid Nitrogen

Thermal Analysis for the Hts Stator Consisting of Hts Armature Windings and an Iron Core for A 2.5 Kw Hts Generator

Simulation and Test for the Thermal Behaviour of a Prototype Synchronous Generator with HTS Armature Windings