Abstract:Generators with high-temperature superconducting armatures have an advantage in the fact that they can carry high currents. However, the AC loss of high-temperature superconducting (HTS) armatures is difficult to calculate precisely because HTS coils exist in a complex and time-varying electromagnetic environment. In addition, when the HTS coil is carrying a short circuit fault overcurrent, an electromagnetic–thermal simulation study of this process is required to ensure that the HTS coil is not damaged. In this paper, first, a fully coupled T-A formulation model is used to calculate the AC loss of HTS armatures. Then, the current and temperature distributions are simulated, considering the intrinsic characteristic of superconducting coated conductors, when the generator suffers the worst short circuit fault accidently. It is found that the turn with the lowest critical current quenches after 0.01 s, but the temperature rise cannot damage the coil if the circuit breaker can clear the fault quickly. The effects of the copper stabilizer thickness on the thermal stability of the HTS coil during the worst short circuit fault are also investigated. A thicker copper stabilizer improves the thermal stability of the HTS coil in the event of a short circuit fault, but the use of a simulation model is needed to make trade-offs between the engineering current density and the thermal stability of the HTS tapes. The work in this paper is necessary and can provide an important reference for manufacturing superconducting generators.

Simulation and Test for the Thermal Behaviour of a Prototype Synchronous Generator with HTS Armature Windings

Development of a Conduction-Cooled HTS SMES

Thermal Analysis for the Hts Stator Consisting of Hts Armature Windings and an Iron Core for A 2.5 Kw Hts Generator

Development and Testing of A 2.5 Kw Synchronous Generator with A High Temperature Superconducting Stator and Permanent Magnet Rotor

Numerical Study on Transient Behaviours of a 30-kW Generator Using a Coupling Method

Multi-field Coupling Finite-Element Analysis of the Temperature Rise in Permanent Magnet Synchronous Motor Applied for High Speed Train

Electromagnetic and Thermal Coupling Analysis of a Water-Cooled Double-Sided Permanent Magnet Linear Synchronous Motor

Design and Test of a Novel Thermal Insulated Torque Coupling for a 15-Kw Fully HTS Synchronous Generator

Thermal Analysis and Experimental Validation of a 30 kW 60000 r/min High-Speed Permanent Magnet Motor With Magnetic Bearings

An Electromagnetic–Thermal Coupling Numerical Study of the Synchronous Generator with Second-Generation High-Temperature Superconducting Armatures

Dynamic Thermal Characteristics of a Conduction-Cooled HTS SMES System

AC Loss Estimation on HTS Armature Windings for a 30-Kw Marine Generator Prototype

Thermal Loss Analysis, Design, and Test of a Novel HTS Magnet System for the Double-Stator Field-Modulation HTS Electrical Machine

Loss measurement and analysis for the prototype generator with HTS stator and permanent magnet rotor

Short-Circuit Fault Simulations in an HTS Wind Generator with Different Mechanical Conditions

Thermal Analysis of High Speed Permanent Magnetic Generator

The Experimental Research and Analysis of a HTS SMES Hybrid Magnet

Calculation, Design, and Winding Preliminary Tests of 90-kW HTS Machine for Small-Scale Demonstrator of Generating System for Future Aircraft With Hybrid Propulsion System

Investigation Of The Cooling And Thermal-Measuring System Of A Compound-Structure Permanent-Magnet Synchronous Machine

Thermal analysis of high speed PM generator used for distributed generation system

A Coupling Simulation And Modeling Method For High Temperature Superconducting Magnets