Abstract:Most present demonstrations of high-temperature superconducting (HTS) synchronous motors/generators are partially superconducting, only installing HTS coils on the rotor as excitation windings. The possible applicability of HTS armature windings is an interesting research topic because these windings can certainly increase the power density attributed to a potentially high armature loading capacity. In this study, we analysed the thermal behaviours of a developed 2.5 kW–300 rpm synchronous generator prototype that consists of an HTS stator with Bi-2223–Ag armature windings on an iron core and a permanent magnet (PM) rotor. The entire HTS stator, including the iron core, is cooled with liquid nitrogen through conduction cooling. The rated frequency is set at 10 Hz to reduce AC loss. The properties of the HTS windings and the iron core are characterized, and the temperatures in the HTS stator under different operation conditions are measured. The estimated iron loss is 11.5 W under operation in 10 Hz at liquid nitrogen temperature. Conduction cooling through the silicon iron core is sufficient to cool the iron core and to compensate for the temperature increment caused by iron loss. The stable running capacity is limited to 1.6 kW when the armature current is 12.6 A (effective values) due to the increasing temperature in the slots as a result of the AC loss in the HTS coils. The thermal contact between the HTS coils and the cooling media should be improved in the future to take away the heat generated by AC loss.

Design Study of a 10-Kw Fully Superconducting Synchronous Generator

Design and Analysis of a Superconducting Induction Magnetic Levitation Device for Hydraulic Turbo-Generator

Research On An Axial Maglev Device With Primary Superconductive Coils For A 1000 Mw Hydraulic Generator Set

35 Kj/7 Kw Conduction-cooled High Tc Superconducting Magnet Energy Storage

Design and Comparison of Segmented Armature Windings for Superconducting Wind Turbine Generators with Multiple Converters

Development and Testing of A 2.5 Kw Synchronous Generator with A High Temperature Superconducting Stator and Permanent Magnet Rotor

Design of A 10 Mw Dual-Stator Superconducting Permanent Magnet Wind Power Generator

Development of a Conduction-Cooled HTS SMES

Stepped-shape Field Winding Optimization of a Large Capacity HTS Aircraft Propulsion Machine

Design Aspects for Permanent Magnet Superconducting Wind Power Generators

Design Of A Dual-Stator Superconducting Permanent Magnet Wind Power Generator With Different Rotor Configuration

Design of a 35 kV high-temperature superconducting synchronous machine with optimized field winding

General Design of a 300-Kvar HTS Synchronous Condenser Prototype

Thermal Analysis for the Hts Stator Consisting of Hts Armature Windings and an Iron Core for A 2.5 Kw Hts Generator

Design and Optimization of High‐Temperature Superconducting Racetrack Magnet for the Rotor of a 100‐kw Generator

AC Loss Analysis and Modular Cryostat Design of a 10-MW High-Temperature Superconducting Double Stator Flux Modulation Machine

Design and Test of a Novel Thermal Insulated Torque Coupling for a 15-Kw Fully HTS Synchronous Generator

Development and Testing of a 300-Kvar HTS Synchronous Condenser Prototype

Calculation, Design, and Winding Preliminary Tests of 90-kW HTS Machine for Small-Scale Demonstrator of Generating System for Future Aircraft With Hybrid Propulsion System

A Pole Pair Segment of Oil-cooling Air-Core Stator for a 2 MW Direct-Drive High Temperature Superconducting Wind Power Generator